Table of Contents
Advertisement
NOTE:
When you connect a computer to this monitor, attach
the supplied ferrite cores. If you do not do this, this
monitor will not comform to mandatory CE or C-Tick
standards.
Attaching the ferrite cores.
Set the ferrite cores on the both ends of the DVI cable
(not supplied), and the both ends of the power cable
(supplied).
Close the lid tightly until the clamps click.
Use the band translation you requested.
DVI cable (not supplied)
band
core (small)
Power cable (supplied)
core (large)
band
To avoid damage and prolong operating life:
1. Use only with 100-240V 50/60Hz AC power supply.
Continued operation at line voltages greater than 240
Volts AC will shorten the life of the unit, and might
even cause a fire hazard.
2. Handle the unit carefully when installing it and do not
drop.
3. Locate set away from heat, excessive dust, and direct
sunlight.
4. Protect the inside of the unit from liquids and small
metal objects. In case of accident, unplug the unit and
have it serviced by an authorized NEC Service Center.
5. Do not hit or scratch the panel surface as this causes
flaws on the surface of the screen.
6. As is the case with any phosphor-based display (like a
CRT monitor, for example) light output will gradually
decrease over the life of a Plasma Display Panel.
Connector
band
core (small)
core (large)
band
Set side
(Plasma Monitor side)
E-4
Recommendations to avoid or minimize phosphor burn-in
Like all phosphor-based display devices and all other gas
plasma displays, PlasmaSync monitors can be susceptible
to phosphor burn under certain circumstances. Certain
operating conditions, such as the continuous display of a
static image over a prolonged period of time, can result in
phosphor burn if proper precautions are not taken. To pro-
tect your investment in this NEC PlasmaSync monitor,
please adhere to the following guidelines and recommen-
dations for minimizing the occurrence of image burn:
* Always enable and use your computer's screen saver
function during use with a computer input source.
* Display a moving image whenever possible.
* Always power down the monitor when you are finished
using it.
NEC has built-in several operating modes in your
PlasmaSync PD Series monitor to help you reduce the
likelihood of phosphor burn. These are called the
AccuShield Phosphor Protection System. If the
Plasmasync monitor is in long-term use or continuous op-
eration, use the functions available in AccuShield to re-
duce the likelihood of perceptible phosphor burn or to di-
minish its perceptible effects if it occurs. See pages E-40
and E-43 for instructions on how to use the Orbiter, Low
Brightness and Inverse RGB modes of AccuShield.
* Lower the Brightness and Contrast levels as much as
possible without impairing image readability.
(See page E-22, E-27)
* Display an image with many colors and color gradations
(ie. photographic or photo-realistic images).
* Create image content with minimal contrast between light
and dark areas, for example white characters on black
backgrounds. Use complementary or pastel color when-
ever possible.
* Avoid displaying images with few colors and distinct,
sharply defined borders between colors.
Contact NEC affiliates on authorized dealer for other rec-
ommended procedures that will best suit your particular
application needs.
Burn-in not covered by the warranty.
Advertisement
Table of Contents
