Advertisement
Quick Links
12-12
SECTION 12 SNOW BLOWERS
-PART B
MODELS 1840,1840A
TABLE OF CONTENTS PART B MODELS 1840,1840A
SEE PART
A
FOR MODELS 2680, 2680A, 2650, 2650A, 2650B
CHAPTER
I
TROUBLE SHOOTING
12-13
TRACTION CLUTCH ROD ADJUSTMENT 12-13
SKID ADJUSTMENT 12-13
BELT ADJUSTMENT 12-13
CHAPTER I11 LUBRICATION AND MAINTENANCE 12-14
A U G E R D R I V E B E L T . .
12-14
TRACTION DRIVE BELT 12-14
CHAPTER I1 ADJUSTMENTS
CHAPTER IV BELT REPLACEMENT
CHAPTER V WHEEL DRIVE GEAR CASE SERVICE
CHAPTER
VI
AUGER
PULLEY
AND
AUGER
GEAR
AND FRICTION DISK REPLACEMENT
12-15
CASESERVICING
12-15
CHAPTER VI1 DRIVE PULLEY REPLACEMENT
12-15
SAFETY WARNING,
DISCONNECT SPARK
PLUG
WIRE
BEFORE SERVICING OR MAKING
ADJUSTMENTS.
SERVICE BULLETIN REFERENCES
Advertisement
Related Manuals for Toro 1840
Summary of Contents for Toro 1840
- Page 1 SECTION 12 SNOW BLOWERS -PART B MODELS 1840,1840A TABLE OF CONTENTS PART B MODELS 1840,1840A SEE PART FOR MODELS 2680, 2680A, 2650, 2650A, 2650B CHAPTER TROUBLE SHOOTING 12-13 CHAPTER I1 ADJUSTMENTS TRACTION CLUTCH ROD ADJUSTMENT 12-13 SKID ADJUSTMENT 12-13 BELT ADJUSTMENT 12-13...
- Page 2 CHAPTER ward, move lower end of control rod down one hole in shift arm. If forward is further away from neutral TROUBLE SHOOTING than reverse, move lower end of control rod up one 1. Worn or broken belts hole in shift arm A.
- Page 3 CHAPTER 111 CHAPTER IV LUBRICATION AND MAINTENANCE BELT REPLACEMENT DAILY BELT REPLACEMENT The belts on this Snow Thrower are specifically de- Check oil. Remove dirt from around oil fill be- signed and engineered to provide long service. If fore removing. Check engine oil with Snow belt replacement is required, order by part number Thrower on level ground and engine stopped.
- Page 4 CHAPTER V WHEEL DRIVE GEAR CASE SERVICING AND FRICTION DISK REPLACEMENT Disconnect spark plug lead. Drain fuel from tank and tip Snow Thrower forward and rest handle on bench. 3. Remove wheels. Remove bottom cover plate. 5. Remove bolts holding both side plates to unit. loose 6.