Advertisement
Quick Links
Acer LCD monitor Quick Start Guide (QSG)
Important Safety Instructions
Please read the following instructions carefully.
This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag and
clean the screen gently.
2. Do not place the LCD Monitor near a window.
Exposing the monitor to rain water,
moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen.
Excess pressure may cause permanent damage
to the display.
4. Do not remove the cover or attempt to service this unit
by yourself. Servicing of any nature should be performed
by an authorized technician.
5. Operate LCD Monitor in a room with a room temperature
°C
°C
of 5
~ 40
outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your
monitor and call an authorized technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been
exposed to rain.
* LCD Monitor or the case is damaged.
Assembly Your Monitor with Monitor Base
Take out the monitor base from monitor box and place
on a stable and level workspace.
Take out your monitor and assembly with the base.
Make sure you heard click sound
Connecting Your Monitor to a Computer
Turn off your computer and unplug your
computer's power cable.
Connect the VGA cable's blue connectors to the
monitor's signal connector and blue video
connector on the back of your computer.
Option:Connect the DVI cable's blue connectors
to the monitor's signal connector and blue video
connector on the back of your computer.
VGA
Cable
DVI Cable
Insert the monitor power cable into the power
(option)
Power Cord
port on the back of the monitor.
Plug the power cables of your computer and
your monitor into a nearby electrical outlet.
Turn on your computer and monitor.
°F
°F
(or 41
~ 104
). Operating LCD Monitor
Operating Your Monitor
1
Auto configuration
AUTO
2
<
Minus
Minus
3
>
Plus
Plus
4
OSD manual
OSD manual
MENU
5
power
Power
Package contents
LCD Monitor
Po wer Cord
User M anual
Quick Start Guide
VGA C able
DVI Cable
(option)
English
English
If OSD is active, press to exit. If OSD is
inactive,
press and themonitor will automatically
optimize the display position,
clock and phase of your display.
If OSD is active, press to select or
adjust OSD options.
If OSD is active, press to select or
adjust OSD options.
Press to view OSD. Press again to exit.
Power on/off
Green: power on
Orange: in sleep mode
(CD)
Advertisement
