Related Manuals for Haier HL32XSL2a
Summary of Contents for Haier HL32XSL2a
- Page 1 OWNER’S MANUAL HL40XSL2/HL40XSLW2/ HL46XSL2/HL46XSLW2/ HL32XSL2/HL32XSLW2 LED HDTV Please READ this manual carefully before operating your TV, and retain it for future reference. 0090509595...
-
Page 2: Warning
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LED HDTV... -
Page 3: Fcc Statement
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this LED display to video equipment; and maintain at least 40cm spacing to other peripheral device. CANADIAN NOTICE: This Class B digital apparatus compiles with Canadian ICES-003. Haier LED HDTV EN-2... -
Page 4: Safety Instructions
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. -
Page 5: Table Of Contents
Select the desired program ..........15 Select the desired sound..........15 Mute..................15 Video menu ............15 How to select picture mode........... 15 How to customize your own picture status....16 PC Set..................17 Audio menu............17 How to select audio mode..........17 Haier LED HDTV EN-4... -
Page 6: Introduction
5 POWER Press to turn on and off the TV. Receivers IR signals from the remote control. 6 Remote Sensor Do not put anything near the sensor, which may block the remote control signal. 7 Power indicator EN-5 Haier LED HDTV... -
Page 7: Connection Options
Headphone audio output terminal. jack Connect a HDMI device to receive digital audio HDMI In and uncompressed digital video. Connect a USB flash drive to view MPEG2 videos, C USB input JPEG images or listen to MP3 songs. Haier LED HDTV EN-6... -
Page 8: Universal Remote Control
Press again to return to the program. Q CH.LIST Open the channel list in TV. R FAV.LIST Press to open the favorite channel list in TV. S ARC(Aspect Ratio Control) Press to change the aspect ratio. EN-7 Haier LED HDTV... -
Page 9: Installation
If the antenna needs to be split for two TV’s, install a “2-Way Signal Splitter” in the connections. To install the antenna properly please contact a professional in your area. Note All cables shown are not included with the TV. Haier LED HDTV EN-8... -
Page 10: Choose Your Connection
VCR. (Refer to the VCR owner’s manual.) in the figure. Select the input source with using the INPUT button on the remote control, and then press button to select the source, press ENTER button to confirm. External A V Source Setup EN-9 Haier LED HDTV... -
Page 11: Connecting A Dtv (Digital Tv)
Audio IN port for audio connections, depending on How to use your computer connector. Turn on the digital set-top box. (Refer to the owner’s If the graphic card on the computer does not manual for the digital set-top box.) Haier LED HDTV EN-10... -
Page 12: Hdmi And Dvi Input
If the source device has an analog audio output The synchronization input form for Horizontal and connector, connect the source device audio output to Vertical frequencies is separate. DVI Audio In port located on the left side of HDMI port. EN-11 Haier LED HDTV... -
Page 13: Connecting Headphones
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. Note Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only. Haier LED HDTV EN-12... -
Page 14: Operation
/ ENTER button and then use button Press / ENTER button to select Tuner. to select Language. Press button to select language. Press button to select Cable or Antenna ( English, Spanish or French) mode. Press button to select Channel Scan. EN-13 Haier LED HDTV... -
Page 15: Channel Skip
/ ENTER button and then use button to select Channel Skip. Press button to select a channel, then press 1.Time shift time. The time delay to the current program ENTER button to toggle between and . time. Haier LED HDTV EN-14... -
Page 16: Select The Desired Program
Press CH+ button to select a channel number in The picture mode provides the pre-defined images number increasing direction. settings: Standard, Vivid, Custom and Mild . Press CH- button to select a channel number in Press MENU button and then use button to EN-15 Haier LED HDTV... -
Page 17: How To Customize Your Own Picture Status
Channel Tint Function Allows you to select the color mix (Tint) of the picture. Lock Sharpness This will adjust the sharpness of fine details in the Select EXIT Back picture. MJC Demo Note 120HZ FULL MOTION Haier LED HDTV EN-16... -
Page 18: Pc Set
/ ENTER button and then use button to select PC. How to Customize your own audio status Press MENU button and then use button to select Audio menu. Press / ENTER button and then use button EN-17 Haier LED HDTV... -
Page 19: Sap Broadcasts Setup
Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to mono sound during Haier LED HDTV EN-18... -
Page 20: Osd Transparency
Auto mode on , the time can not be adjusted. Select Off , you can operate to set the time manually. Blue Screen Date: Press VOL+/- button to select the position and digits button to set the date. EN-19 Haier LED HDTV... -
Page 21: Close Caption
Window Color Press VOL+/ ENTER button to enter the submenu. Lock Window Opacity Solid Are you sure? DTV Caption Style Select EXIT Back CC1: When CC1is displayed on TV means CC Cancel mode is turned on. Haier LED HDTV EN-20... -
Page 22: Lock Menu
The TV is set up with the initial password “0-0-0-0” NC-17 (No one 17 and under admitted) and security default password is 9-4-4-3. (Adult only) If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. EN-21 Haier LED HDTV... - Page 23 Analog Channel Block Select EXIT Back ENTER Note The V-chip will automatically block certain Program Block categories that are “More restrictive” . For example, if you block “ ” sub-rating in TV-PG, then the “ ” Haier LED HDTV EN-22...
- Page 24 OK Audio to resume it .( Press OK to display password menu and Channel input your password.) Function Lock Allowed Rating Blocked Rating CA Eng Rating ENTER Select EXIT Back CA Fren Rating EN-23 Haier LED HDTV...
-
Page 25: Other Functions
Closed captions allow viewers to read the dialogue and narration of television programs. Haier LED HDTV EN-24... -
Page 26: Usb Input
Not all TV programs and product previous menu. commercials are made for broadcast with Closed Caption information included. Refer to your area’s TV program listings for the TV channels and times EN-25 Haier LED HDTV... -
Page 27: To Play Pictures
Information Short/Medium/Long Press MENU button to display the option list. 1. Play Time 4. Shuffle On or Off 2. File Name 5. Audio Only 3. Repeat 6. Information Press MENU button to display the option list. Haier LED HDTV EN-26... -
Page 28: To Play Video
USB device. Press MENU button, and the press to select Media Type , Press ENTER and press to select Video. Press button to select desired video folder, and then press ENTER button to enter the play interface. EN-27 Haier LED HDTV... -
Page 29: Universal Remote Control
LED will not blink. Press and release the CH+/CH- key. it will emit the Default init status: TV/Haier codeset. next or the previous POWER key code. The LED blinks with 10 HZ freq, indicating that the Remote is Manually Programming the Control in manually scan mode. -
Page 30: Remote Control Codes
Press and holding the ENTER key and then press POWER key for 3 seconds, the LED will blink 3 times and turn off, Display mode default Haier codeset (001) will be programmed to the Choose the device you wish to program. control. - Page 31 181 Philips 040 041 042 043 044 045 046 055 059 060 063 065 071 089 090 091 096 160 162 164 169 100 Harvard 067 335 174 177 179 190 208 291 320 347 351 Haier LED HDTV EN-30...
- Page 32 256 TNCi 257 Toshiba 017 018 019 020 074 075 099 100 104 106 109 111 113 115 120 123 146 151 173 227 354 Gradiente 270 325 258 Totevision 076 352 Greenhill 259 Trutech Grundig EN-31 Haier LED HDTV...
-
Page 33: Haier Led Hdtv En
000 001 002 003 004 005 006 049 052 055 056 057 060 061 065 076 081 092 094 097 109 112 114 Harley Davidson 126 127 128 146 147 148 155 230 231 232 316 317 318 335 Harman/Kardon Sungale Headquarter Haier LED HDTV EN-32... - Page 34 008 045 102 108 114 Memorex Sanyo 012 028 029 073 119 MicroGem Scott 010 018 Mitsubishi 017 063 Sears 008 013 028 030 031 112 120 Motorola 090 093 Next Level Sharp 022 023 052 090 096 EN-33 Haier LED HDTV...
- Page 35 024 044 Bel Canto Design Motorola 000 003 005 008 039 040 042 043 Biamp Movie Time BOSE 071 088 285 Multitech Boston Acoustics California Audio Labs NET Brazil Cambridge Sound Works 241 Capetronic Carver 318 322 Haier LED HDTV EN-34...
-
Page 36: Maintenance
103 Prima lint-free cloth. Please be sure not to use a wet cloth. 104 Proscan 105 Qisheng 106 Quasar 107 RadioShack Extended Absence 108 RCA 048 049 050 051 151 137 234 283 319 320 321 332 EN-35 Haier LED HDTV... -
Page 37: Specification
For the sake of time and cost, it is strongly recommended that you check out the problem by Note yourself according to the instructions listed hereunder Do not leave the television with static picture in before contacting the after-sales service for technical Haier LED HDTV EN-36... -
Page 38: Warranty
This is not a defect covered by repairs performed by anyone other than an authorized the limited warranty. service center or dealer; nor shall Haier be liable, or in any way responsible for incidental or consequential Warranty economic or property damage. - Page 39 Warranty Haier LED HDTV EN-38...