Page 1
Installation, Use & Care Guide 30” and 36” Free-Standing Range Hood Guia de Instalación, Uso y Cuidado 30” y 36” Campana extractora Guide d’installation, utilisation et d’entretien 30” et 36” Hotte aspirante RH30WC55GSB + RH36WC55GSB 316495102...
Purchase date NOTE Registering your product with Electrolux enhances our ability to serve you. You can register online at Model number www.electroluxappliances.com by dropping your Product Registration Card in the mail. Serial number (see picture for location) Questions? For toll-free telephone support in the U.S.
Important Safety Instructions 3 3 3 3 3 Important Safety Instructions Read all instructions befor Read all instructions befor Read all instructions before using this e using this e using this e using this Read all instructions befor Read all instructions befor e using this appliance.
4 4 4 4 4 Important safety Instructions READ AND SAVE THESE INSTRUCTIONS Important safety Instructions FOR GENERAL VENTILATING USE ONLY . DO NOT USE Automatically Operated Device - T Automatically Operated Device - T Automatically Operated Device - T Automatically Operated Device - T Automatically Operated Device - To Reduce The o Reduce The...
Important safety Instructions - Electrical & Installation 5 5 5 5 5 requirements READ AND SAVE THESE INSTRUCTIONS Electrical & Installation requirements Electrical r Electrical r Electrical r Electrical r Electrical requir equir equir equirements equir ements ements ements ements Before installing the hood IMPOR IMPOR...
List of Materials List of Materials Parts Included with your Hood Hood structure assembly with blower, transition. Lamp already installed. 2 grease lters 30”or 3 grease lters 36”. Duct covers. Hardware bag with: Template Duct cover support bracket (1 piece) Use, care and installation guide Wood screws (6 pieces - 3/16"...
Installing the hood 7 7 7 7 7 Installing the hood The hood may be installed onto a wall and vented to For the most e cient air ow exhaust, use a the outdoors, or it can be installed for recirculating straight run or as few elbows as possible.
8 8 8 8 8 Installing the hood Examples of possible ducting Ductwork installation guidelines Ductwork and wiring locations Ductwork and wiring locations Ductwork and wiring locations Ductwork and wiring locations Ductwork and wiring locations For safety reasons, ducting should vent directly Determine the exact location of the vent hood.
Installing the hood 9 9 9 9 9 Mounting the duct cover bracket Mounting the duct cover bracket Ceiling ducting Ceiling ducting Mounting the duct cover bracket Mounting the duct cover bracket Mounting the duct cover bracket Ceiling ducting Ceiling ducting Ceiling ducting The duct cover bracket should be installed against If the duct will vent straight up to the ceiling:...
Installing the hood Install framing for hood support Mounting the hood If drywall is present, mark the screw hole Install the 8” round transition as shows the image below. locations. Remove the template. The installation screws and the 8” round transition are Cut away enough drywall to expose 2 vertical included on the hood package.
Installing the hood 11 11 11 11 Air de ector installation Air de ector installation Air de ector installation Air de ector installation Air de ector installation Remove the hood. Drive “lower” wood screws, by hand. Remove (Recir (Recir (Recir (Recir (Recirculating accessories) culating accessories)
Installing the hood Making the electrical connections If not already done, install 1/2” conduit connector in j-box. NOTE: This connector is not included with vent hood. Metal electrical Electrical Shock Hazard conduit Warning: Turn off power at the service panel before wiring this unit.
Installing the hood 13 13 13 13 Mounting the duct cover Mounting the duct cover Secure the bottom of the duct with 2 assembly Mounting the duct cover Mounting the duct cover Mounting the duct cover screws provided. Position the duct cover over the mounted hood. Slide the bottom of the duct into the glass area.
Control buttons 15 15 Control buttons This hood is equipped with an electronic motor and lamp control. button is pressed, the fan will be set to rst The control is able to set 4 di erent fan speeds, turn speed. ON/OFF light and has a timer function.
16 16 Control buttons - Special functions Special functions Clock pr Clock pr Clock programming ogramming ogramming ogramming Clock pr Clock pr ogramming The clock can be reprogrammed at any time except during an active timed function. The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59. The clock can be reprogrammed pressing the “...
17 17 For Best r For Best r For Best r For Best r For Best results esults esults esults esults Continuous use of the fan system while cooking helps keep the kitchen comfortable and less humid. It also reduces cooking odors and soiling moisture that create a frequent need for cleaning. Turn the blower on before starting to cook.
18 18 18 18 Care and cleaning Care and cleaning Lights The frequency of cleaning depends on the amount and type of cooking. Do not use the ventilating system without the Before replacing the lamps, switch power off at service panel and lock service panel disconnecting surfaces.
Care and cleaning Optional Charcoal Filters If the model is not vented to the outside, the air will be recirculated through disposable charcoal lters that help remove smoke and odors. The charcoal lters cannot be cleaned. They must be replaced. The charcoal lters are clipped inside of each metal grease lter (mounting instructions included with charcoal lter kit).
Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.