Advertisement
Quick Links
Nokia Radio Assembly Installation Guide
The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. The installer must refer to the appropriate local
safety codes and ensure proper electrical and electromagnetic compatibility before proceeding with the installation. All local codes shall take
precedence over information in this document. Antenna systems should be inspected once a year by qualified personnel to verify proper installation,
maintenance, and condition of equipment. Communication Components Antennas Inc. disclaims any liability or responsibility for the results of
improper or unsafe installation.
50-000232-02 Installation Guide
1
Advertisement
Related Manuals for Nokia AHPC
Summary of Contents for Nokia AHPC
- Page 1 Nokia Radio Assembly Installation Guide The installation, maintenance, or removal of an antenna requires qualified, experienced personnel. The installer must refer to the appropriate local safety codes and ensure proper electrical and electromagnetic compatibility before proceeding with the installation. All local codes shall take precedence over information in this document.
- Page 2 Nokia Radio Assembly Installation Guide Note: Radio installation starts with the lower unit, (AHEB) equipment with RM-06 installed. Mounting kit and pole removed for clarity from all images in this document. Fig. 1: AHEB Radio Preparation Step Task Lift and turn both locking pins to the unlocked position as shown in Detail A above.
- Page 3 Nokia Radio Assembly Installation Guide Fig. 2: Radio aligned to antenna rails Step Task Align radio with it’s corresponding rails and side to the left. (Note: Radios can be installed from left or right side of the antenna) 50-000232-02 Installation Guide...
- Page 4 Nokia Radio Assembly Installation Guide Fig. 3: Installation of Radio onto the Antenna Bracket Step Task Slide the radio until the 4 radio connectors and bucket connector align, turn locking pin handle as shown in detail. (Note: Radios can be...
- Page 5 Nokia Radio Assembly Installation Guide Fig. 4: Locking Radio in Position Step Task Using tool (TL-04) as shown, push down gently unit both spring lock snap into the locked position as shown in Detail B. 50-000232-02 Installation Guide...
- Page 6 Nokia Radio Assembly Installation Guide Note: Radio installation continues with the upper unit, (AHPC) equipment with RM-07 installed. Fig. 5: AHPC Radio Preparation Step Task Lift and turn both locking pins to the unlocked position as shown in Detail above.
- Page 7 Nokia Radio Assembly Installation Guide Fig. 6: Radio aligned to antenna rails Step Task Align the radio with it’s corresponding rails and side radio to the left. (Note: Radios can be installed from left or right side of the antenna)
- Page 8 Nokia Radio Assembly Installation Guide Fig. 7: Installation of Radio onto the Antenna Bracket Step Task Slide the radio until the 4 radio connectors and bucket connector align, turn locking pin handle as shown in detail l. (Note: Radios can be installed from left or right side of the antenna).
- Page 9 Nokia Radio Assembly Installation Guide Fig. 8: Locking Radio in Position Step Task Using tool (TL-04) as shown, push down gently unit both spring lock snap into the locked position as shown in Detail “C”. 50-000232-02 Installation Guide...
- Page 10 Nokia Radio Assembly Installation Guide Fig. 9: Final Installation View 50-000232-02 Installation Guide...
- Page 11 Nokia Radio Assembly Installation Guide Radio removed process is the same for both lower and upper units. Fig. 10: Radio Unlocking View Step Task Pull and turn locking pins as showing in Detail “D” and using tool (TL-04) as shown, lift radio away from connector bucket assembly.
- Page 12 Nokia Radio Assembly Installation Guide Fig. 11: Radio Removal Step Task While lifting the radio towards the antenna top, slide radio assembly either to the left or right for full removal. 50-000232-02 Installation Guide...