Page 1
TOP LOAD FULLY AUTOMATIC WASHING MACHINE OWNER’S MANUAL MODEL HWM110-B2178S8 HWM120-B2178S8 HWM130-B2178S8 0030519825 Please read this manual carefully before operating your washing machine and retain it for future reference.
CONTENTS Product Description Safety Information Description of symbols Safety Warnings Balancing the washing machine Usage of the drain hose Inlet hose connection Before Washing Check the following before washing Operation Loading your laundry Usage of the detergent Operation and Wash Cycles Explanation of buttons Cleaning and Maintenance Troubleshooting...
Product Description Top lid Detergent and softener tray Lint Filter Box Outer tub cover Inner tub Top deck Pulsator Lid lock Cabinet Plinth Dial Control panel Cold water inlet valve Hot water inlet valve Hook Handle Power cord Back cover Drain hose connector Fixed (Not to be removed by...
Safety Information Description of symbols Warning sign Contents marked with this symbol are related to the safe use of the product and the personal safety of the user. Please operate in accordance to the contents of this manual, to avoid harm to the user or damage to the machine itself. Forbidden sign Contents marked with this symbol indicate operations or actions that should not be undertaken by the user.
Page 6
Safety Information Forbidden Do not connect to hot water higher than damp or wet environment. 50°C. Do not leave wet laundry on the The maximum inlet control panel or spray water directly onto this water pressure refer to appliance, as this may cause the washer to malfunction or cause an electrical fault.
Page 7
Safety Information Safety warning The washing machine whose lid can be opened during water extraction, that it takes The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. Please remove item such as coins, button, Check that water faucets are openafter sand and other solid materials from clothing connection to machine, prior to operation...
Installation and Adjustment It is very important to follow these directions for the safe operation of the machine and to ensure your machine operates correctly. Install the bottom plate The purpose of the bottom plate is to suppress noise from the washing machine during operation.
Installation and Adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. Bracket 2.Connect drain hose guide on to the outside of drain hose. Drain hose clamp Drain hose joint 0.8 -1.2m. 2.To avoid syphoning, the drain hose should not extend 0.8m h 1.2m more than 20 mm from the end of the guide.
Installation and Adjustment Inlet hose connection The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. 1.Connect the water inlet hose to the water tap. You may have to use pliers to tighten the coupling.
Before washing Preparation before washing Check the following before washing Clear the pockets The weight of the When the machine is running,buttons may and take out loose laundry shall not items such as coins, buttons and close exceed the rated cause noise.
Operation Loading your laundry of a load that can be washed. The thickness, size and type of clothes will actual capacity. Do not select more than water level “4” for clothes less than 1.0kg, to avoid splashing of water. washing powder should be used.
Operation and Wash Cycles Explanation of buttons Indicator display O :Indicates that the operation is complete or disabled. On: Indicates that the program is running and indcates the selected cycle and options. Flashing: When it pauses, it indicates the washing progress status of the current washing cycle.
Page 14
Operation and Wash Cycles A: "Water Level" button Set the water level during initial operation or pause. During the operation of "Soak", "Wash", and "Rinse", pressing the “Water Level” button will manually replenish the water (the main inlet valve will act).
Page 15
Operation and Wash Cycles E: "Water Temp" button Used for controlling the water inlet ratio of cold and hot water valves on computer boards. The default inlet water temperature for startup is Cold. Every time the “Water Temp” button is pressed, the indicator light changes as follows: Cold →Warm →Hot Water Temp...
Page 16
Operation and Wash Cycles G: " Delay " button The appointment button is used to control the selection of appointment functions on the computer board,The "Tub clean" function cannot be selected for "Delay". Delay settings:During the startup phase, select the delay function and the digital display will show "00:00".
Page 17
Operation and Wash Cycles J "Program" select : Set the program by rota ting the dial Max Load Size Suitable for mixed washing of cotton, linen, and synthetic ber clothing. The washing machine Smart Wash can automatically set the water intake and 11kg/12kg/13kg washing time according to the weight of the clothing to achieve the best washing e ect.
Page 18
Operation and Wash Cycles 1、 Press the button to power on/o . 2、Rotate the dial to select automatic program. After the power is turned on, the default is “Smart Wash” program. Rotate the dial clockwise to select these programs as follows: “Cotton”, “Mix”, “Quick”, “Delicate”, “Wool”, “Baby Care”, “Sports/Jeans/Heavy”, “Bedding”, “Anti-Crease/Shirts/Duvet”, “Eco”...
Cleaning and Maintenance Maintenance Remove the power plug before carrying out any cleaning or maintenance. fter each wash,otherwise it may you using the machine. Clean the detergent box 1.Pull it out gently. 2.Use a brush 1.Push down spring piece of the top lint water.
Troubleshooting If there is a fault or the machine does not operate correctly,remove the power plug before checking the machine.Using diagnostic list below,please check if the machine requires repair.If a repair is required,please contact our customer care team,do not try to x it by yourself Problem Causes...
Page 21
Troubleshooting Problem Cause Solution Is the machine not level ? Level the machine. There are abnormal Has the laundry been placed Redistribute the load evenly. sounds inside the unevenly in the machine? Close the top lid. Are there any foreign objects Remove the foreign object.
Page 22
Haier Egypt Electric Appliance Co Limited warrants to provide service at Out o Warranty period customer expense Out o the li espan The Product still can be used, Haier Egypt Electric Appliance Co Limited will provide service based on company’s service policy.
Page 23
ﺳﻨﻮا ت اﻟﻌﻤﺮ اﻻﻓﺘﺮاﺿﻲ ﻟﻠﻐﺴﺎﻟﺔ � � ﻓ� � ة اﻟﻀﻤﺎن، ﺳﺘﻘﻢ � � ﻛﺔ ﻫﺎﻳﺮ إ�ﺠﻴ�ﺖ إﻟ�� � �ﻚ أ�ﻼﻳ�ﺲ ﻛﻮﻟ�ﻤﺘ�ﺪ ﺧﺪﻣﺔ ﻣﺎ �ﻌﺪ اﻟﺒﻴﻊ ﻃ�ﻘﺎ ﻟ�ﻄﺎﻗﺔ اﻟﻀﻤﺎن � ﺧ ـ ـﺎرج ﻓ ـ ـ� � ة اﻟﻀ ﻤ ـ ـﺎن ) ﺧ ـ ـﻼل اﻟﻌ ﻤ ـ ـﺮ اﻻ ﻓ ـ ـ� � ا� � ( ﺳ ـ ـﺘﻘﺪم � � ﻛ ـ ـﺔ ﻫﺎ ﻳ ـ ـﺮ إ�ﺠﻴ � ـ ـﺖ إﻟ�� � � ـ ـﻚ أ�ﻼﻳ � ـ ـﺲ ﻛﻮﻟ�ﻤﺘ � ـ ـﺪ ﺧﺪ ﻣ ـ ـﺔ اﻹ ﺻ ـ ـﻼح و ﺗﻮ ﻓ ـ ـ� � ﻗ ﻄ ـ ـﻊ اﻟﻐ�ﺎر...