SAFETY INSTRUCTIONS
4
Operation
• Do not clean using the powerful detergent like solvent but use soft cloths.
It will cause fire or product deformation.
• Do not press the screen using powerful pressure or select two buttons.
It will cause product breakdown or malfunction.
• Do not touch or pull the lead wire with wet hands.
It will cause product breakdown or electric shock.
• The appliance is only to be used with the power supply unit provided with the appliance.
• The appliance must only be supplied at safety extra low voltage corresponding to the marking
on the appliance.
According to IEC 60335-1
This appliance is not intended for use by person (including children) with reduced physical, or
mental capabilities, or lack of experience and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
According to EN 60335-1
This appliance can be used by children aged from 8 years and above and person with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
Class A device
NOTE
This equipment has been tested and identified as complying with the limits for a Class A digi-
tal device, and acts in accordance with part 15 of the FCC Rules. These rules are designed to
provide protect the equipment from any detrimental damages while operating in a commer-
cial environment. This equipment generates, uses, and can emits radio frequency energy.
If it is not installed and used according to the instruction manual, it may cause detrimental
damage to the radio communications. Ensure that this product is NOT operated within resi-
dential premises as it might emit dangerous radiations. In such a scenario, the user is respon-
sible for damage repair.
CAUTION
!
Changes or modifications that are not approved by the manufacturer responsible for compli-
ance could render the user authority as invalid.
• Selection of Transformer.
- Select an insulation product that complies with IEC61558-2-6(or UL5085-3) and NEC Class 2.
- Considering PDI current consumption, connect only one PDI per Transformer.
- To supply power to PDIs sold in the U.S., be sure to use a transformer with VA rating not ex-
ceeding 20 VA.