Table of Contents
Advertisement
2
While supporting the door, remove the 2
screws
on the door hinge, two from each
b
hinge. Set the door aside face down on a
protected surface to prevent damage to the
door or the work surface.
WARNING
• The edges of the door cover may be sharp. Take
care when handling, or wear gloves to avoid
injury.
3
With the door on a protected surface, remove
all screws on each side of the door and lift off
the inner door frame
screwdriver. Remove the latch hook
blank
and install them on the opposite side.
e
4
Remove the 4 screws
to the door frame. Remove the two plastic
cover caps
. Reinstall the hinges
g
using a flat blade
c
and
d
securing the hinges
f
and
f
cover caps
on the opposite sides from
g
which they were removed.
5
With the hinges and cover caps in the new
locations, remount the inner door frame onto
the outer door frame with the screws
removed in step 3 above.
WARNING
• Be sure to support the weight of the door before
assembling the hinge screws.
6
Reinstall the door with the screws removed in
step 2. Install the two plastic hole caps
removed in step 1 on the opposite side.
Installing the Vent Kit
WARNING
• Use long-sleeved gloves and safety glasses.
• Use a heavy metal vent.
• Do not use plastic or thin foil ducts.
• Clean old ducts before installing the appliance.
INSTALLATION
15
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
