About Other Functions of ebiiGO App P20 Specifications of ebii 20 10.1 ebiiRide-Destination 10.2 ebiiRide-Route Preparing for the First Ride on ebii 20 P09 10.3 Confirm / Search the Location of ebii 20 10.4 Confirm the status of Network Service Mount the Reflector Panels...
Page 3
Once the ebii 20 is damaged or partially immersed in water, be sure not to use it anymore. 1.1.7 The ebii 20 can only be cleaned with mild detergent and slightly wet cloth. Be sure not to use solvent on it. However, for the areas of screen, buttons and charging port, use a dry cloth to clean, avoid moisture inlet.
Page 4
1.1.22 Refitting the ebii 20 or changing any parts of the ebii 20 arbitrarily will lead to the invalidation of the warranty. For your safety while riding the ebii 20, if any parts are required to be replaced, please contact our company and/or the qualified suppliers authorized by our company for further...
◆ Do not drop or crash the battery and charger. ◆ Only use the charger provided with the ebii 20 or charge with backup/ replaceable charger provided by ◆ the official distributor. Please do not use the battery or charger for other purposes not mentioned in this manual.
Unbox your ebii 20 Instructions for Unboxing You can follow the instructions on the paper carton to complete the unboxing of ebii 20. (1)Remove the buckles on the four sides of the carton, six in total. (2)Lift and open the carton from the adjacent side. You can take out ebii 20 accordingly.
Page 7
20 Accessories The accessories coming with ebii 20 include: 5mm hex key x 1 4mm hex key x 1 Open-end wrench x 1 Power transformer x 1(set) Charging cable x 1 *A suitable charging cable will be provided subject to the different sales territories.
Specifications of ebii 20 Specifications of ebii 20 55 cm Width of Handlebar Brake 160 mm Hydraulic Disc Brakes Lighting Front/ Rear/ Side light Controller 48V CAN Bus ‒ Automatic Assistance Control 8x8 LED Dot-Matrix Frame Aluminum Alloy Drive Single Speed...
Preparing for the First Ride on ebii 20 Mount the Reflector Panels After fastening the front reflector panel and the holder with screws, mount and fasten the holder tightly onto the handlebar. After fastening the rear reflector panel and the holder with screws mount and fasten the holder tightly onto the seat post.
Notice : 1. If there’ s a radar installed on your ebii 20, the fixation of the radar relies on the positioning after pushing down the clamp of seat post to set the screw. Therefore, please do not loosen the securing screw of the radar while adjusting the saddle height to avoid radar swaying.
Assemble Both the Pedals The pedals are designated for the left and right sides. Please follow the instructions on the pedal to separately assemble the pedal onto the left and right cranks with the open-end wrench. Apply a small amount of lubricating oil when tightening the screws to reduce friction during fastening.
Register Your ebii 20 3.7.1 Before riding the ebii 20 for the first time, please complete the registration process for ebii 20 owners by following the steps below. Only after completing the registration can you use the complete ebii 20 functions.
Page 13
3.7.5 Please follow the instructions on the App screen to complete the analysis of your riding habits. The analysis results will be used as the default electrical power assistance settings for ebii 20. 3.7.6 Select “Add Your First Bike!” 3.7.7 Please follow the instructions, and select :...
Set the Password 3.8.1 After completing the binding procedure for ebii 20 E-Bike owners, you can set a 4-digit password. If the Auto-Unlock function of ebiiGO App is disabled, you can unlock ebii 20 manually with the password you have set.
Page 15
Enter the fourth-digit password 3.8.3 If you want to check the password for manually unlocking ebii 20, please click on the central ebii 20 Icon in the ebiiGO App to enter Bike Control. Enable Anti-theft Protection in Bike Control/Security to...
Start ebii 20 When you have your smartphone with you and keep the ebiiGO App logged in, simply approach your ebii 20. It will automatically unlock (the dashboard will display the batter capacity of ebii at this time), allowing you to start your ride.
About the Brake 5.2.1 Please get familiar with the brake system of ebii 20. The brake system of ebii 20 is constructed as braking the front wheel with the left brake/ braking the rear wheel with the right brake. 5.2.2 While riding ebii 20 on rainy days or on wet roads, riders should slow down for an extended braking distance to ensure the riding safety.
In compliance with regulations, when riding ebii 20 and reaching a speed of 25 km/hr, electric assistance power will no longer be provided. Lock ebii 20 When the kickstand is raised or ebii 20 remains still for over five minutes, ebii 20 will automatically enter lock mode. Anti-theft Warning ebii 20 will automatically activate the anti-theft function.
You can check the battery level through the dot-matrix display on the stem to check the battery level, or through ebiiGO App. Battery Level (The Battery Level Displays on the Stem of ebii 20) (The Battery Level Displays on ebiiGO App) When the low battery indicator appears and flashes, please charge ebii as soon as possible.
(2)My ebii mode : Standard mode. During the ride, the system will provide standard assistance, allowing you to comfortably reach your destination. (3)Eco mode: Energy-saving mode. During the ride, the system will provide less assistance, allowing you to smoothly reach your destination. With this mode, ebii 20 will have the longest battery life.
10.1.4 Tap “Go” button to start riding. 10.2 ebiiRide-Route 10.2.1 Tap ” Route” .
Page 22
10.2.2 According to the instruction of the App display, you can plan multiple destinations during a ride. 10.2.3 App will provide you with three suggested power assistance modes based on your riding habits and the distance to the destination: Boost mode / My ebii mode / Eco mode. 10.2.4 Tap “Go”...
10.3 Confirm / Search the Location of ebii 20 If you want to confirm the location of your ebii 20, you can select Find Bike, and ebiiGO App will display the location based on the network service status of ebii 20.
11.1.1 Use the proper charger provided by the company or authorized distributor only. 11.1.2 You can charge the battery by either installing it on ebii 20 or removing it for charging. 11.1.3 While charging, please open the battery cover, insert the charger into the charging port, and plug it into a 100V~240V socket to charge the battery.
Page 25
11.2 Remove the Battery 11.2.1 Hold the battery under the frame to ensure that it won’ t drop while unlocking. 11.2.2 Insert and turn the key counterclockwise to unlock. 11.2.3 Toggle the snap switch of the battery under the frame.
11.3.5 Remove the key 11.4 Power Sharing The battery of ebii 20 provides two charging ports of USB Type C for the charging of phones, laptops and tablets. The USB Type C charging port labeled with the PD symbol offers 60W (PD3.0)
12.1.2 The parts of ebii 20 may be worn out due to the load weight and accumulated riding time. If the parts have exceeded their service life, there is a risk of malfunction, leading to potential accidents or injuries.
◆ the electronic component, probably resulting to a malfunction or defection. Please do not use excess water to clean the parts of the ebii 20. If water goes into the internal electronic ◆ components, it may lead to malfunction or other problems.
13.1.3 If you make a claim or request based on the Warranty Statement, Acer Gadget has the right to choose to repair or replace any defective product or part using new or factory-refurbished parts. If Acer Gadget choose to use factory-refurbished parts or products, they will have the same perfor- mance characteristics as ordinary parts.
13.2 Warranty Exclusions Acer Gadget does not guarantee uninterrupted or error-free operation of this product. Any technical or other supports provided during the warranty period, such as assistance with operational procedures, product settings and information issues through phone consultations, can be obtained without presenting any service manual.
13.2.2 Warranty Limitations and Disclaimers 13.2.2.1 You understand and agree that this warranty is only applicable to the original ebii 20 owner, non-transferable, and Acer Gadget is liable for the limited warranty responsibilities for the warranty services stated in the Warranty Statement. Under any circumstances, Acer Gadget is not responsible for any direct, incidental or consequential damages, including but not limited to compensation for property damage or economic loss.
13.4 Terms of Warranty 13.4.1 For the original ebii 20 owner, our company offers the services starting from the date of purchase: Parts Category Warranty Period Warranty Coverage and Conditions Replace the same frame under warranty. If the product has been...
Page 33
We will provide paid warranty services. The company reserves the right to modify, clarify and interpret the aforementioned product Warranty Statement through written communication, the website or other means. For the latest information, please visit the website of Acer Gadget: https://www.acergadget.com/zh-TW/pages/維修服務支援...
Page 34
Cycles - Electrically power assisted cycles - EPAC Bicycles For the following equipment : Product : ebii20 Electrically power assisted cycles - EPAC Bicycles Type Designation/Trademark : Acer Gadget Person responsible for making this declaration : Name, Surname : Position/Title :...
Page 35
20 Product Warranty Card 產 品 保 固 服 務 卡 , 产 品 保 固 服 务 卡 , 製 品 保 証 書 Please retain the original purchase receipt or approval in order to protect your right of free warranty service.