Advertisement
Quick Links
Input interface cover
@
Temporarily interrupts video and audio
outputs from the projector or speakers
except for the [AUX In] port.
(2)
Turns the projector power on or off.
=
©
Configures the audio output from the
speakers when they are connected to this
product.
Do not change this switch because the
setting was done optimally at installation.
©
Temporarily mutes audio signals from
the [AUX In] port.
Z
Q
O Operation indicator
kS
>
D
© [Audio Mute] button
SS
-7
g i ——
©) Dip switch
DA | —
Power switch
l |
[Volume] dial
|
|
|
2
Input source buttons
©
Indicates the status of the Connection &
Control Box.
(|) : Operating normally.
Green
'im
:In standby. Press any button
Orange
except [Volume] dial to resume.
`
: An error has occurred. Unplug the
Red
Connection & Control Box, and
contact your dealer.
Video and audio playing on the input devices do not stop even though the
[A/V Mute] button or [Audio Mute] button is pressed. You cannot resume the
scene from the point you activated the A/V Mute or Audio Mute function.
E Input Ports
Connect cables according to your devices to use.
[Audio1] input port
[Audio2] input port
[Audio-L/R] input port
[AUX In] port
[REC Out] port
00000
[HDMI] port
@eoodsd
[USB TypeB] port
[USB TypeA] port
[S-Video] input port
[Video] input port
[Computer2] input port
[Computer1] input port
e Make sure to tighten the screws on the computer cable ports.
e For projectors which audio can be input with the USB cable in the USB
Display function, connect the audio cable to@ [Audio2] input port.
e When inputting audio from a portable audio player and such, connect the
audio cable to @ [AUX In] port. The audio input from @ [AUX In] port is
always played regardless of the selected source.
e When connecting a recording device, connect the audio cable to@ [REC Out]
port. Audio is output in a constant level and cannot be adjusted.
Advertisement
