Table of Contents
Advertisement
Available languages
Available languages
14 OPERATION
Restarting the Air
Conditioner Automatically
When the air conditioner is turned on again after
a power failure, this function restores the previous
settings.
Disabling Auto Restart
1
Open the front cover (Type2) or horizontal
vane (Type1).
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and the
lamp will blink twice 4 times.
• To re-enable the function, press the ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
Type 1
Type 2
ON/OFF
NOTE
• The feature may be changed according to the
type of model.
• If you press and hold the ON/OFF button for
3 – 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling air
for 18 minutes and then returns to factory default
settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling Mode
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
•
is displayed on the display screen.
3
Press
or
button to set the desired
temperature.
Auto Operation
In this operation mode, the system is automatically
operated by the electronic controls.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Changeover Mode.
•
is displayed on the display screen.
3
Press
or
button to set the desired
temperature.
4
Press FAN SPEED button to adjust the fan
speed.
NOTE
• Some functions may not be supported,
depending on the model.
Advertisement
Chapters
Table of Contents
