Table of Contents
Advertisement
Available languages
Available languages
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of
y
heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
CAUTION
y When adjusting the angle of the product, watch
y
out for your fingers.
Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
ASSEMBLING AND PrEPArING
Securing the TV to a wall
This feature is not available for all models.
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
20˚
flat surface.
CAUTION
y Make sure that children do not climb on or
y
hang on the TV.
NOTE
y Use a platform or cabinet that is strong and
y
large enough to support the TV securely.
y Brackets, bolts and ropes are not provided.
y
You can obtain additional accessories from
your local dealer.
19
Advertisement
Table of Contents
