Yamaha MDX-595 Service Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Minidisc Recorder
  5. MDX-595
  6. Service manual

Yamaha MDX-595 Service Manual

Hide thumbs Also See for MDX-595:
Table of Contents

Advertisement

Quick Links

Download this manual
NATURAL SOUND MINIDISC RECORDER MDX-595
POWER
TIMER
OFF
REC
PLAY
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherant to the industry, and more specifically
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is be lieved to be ac curate and applicable to the unit(s) indica ted on the cove r. The rese arch, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, plea se contact
the distributor's Service Division.
WARNING:
IMPORTANT:
CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . 1~2
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DISASSEMBLY PROCEDURES . . . . . . . . . . . . . . . 4~8
ADJUSTMENT & TEST MODE . . . . . . . . . . . . . . . 9~16
SPECIAL TEST MODE . . . . . . . . . . . . . . . . . . . . . . . 17
ERROR DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . 18~19
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . 20~24
このサービスマニュアルは、エコマーク認定の再生紙を使用しています。
This Service Manual uses recycled paper.
1 0 0 6 7 1
MINIDISC RECORDER
MDX-595
EJECT
RANDOM
S/F REPEAT A-B
DISPLAY
SCROLL
TITLE
CHARA.
IMPORTANT NOTICE
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that all service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-
lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
SERVICE MANUAL
DIGITAL
REC LEVEL
DELETE
EDIT
SET
SEARCH
CANCEL
ENTER
IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25~34
BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . 35~37
TEST POINT WAVEFORMS . . . . . . . . . . . . . . . . 38~39
PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . 40~47
SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . 48~51
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52~64
GREASE APPLICATION DIAGRAM . . . . . . . . . . . . 65
REMOTE CONTROL TRANSMITTER . . . . . . . . . . . 66
MDX-595
REC
ANALOG
REC LEVEL
PHONES
LEVEL
INPUT
0
10
0
10
YAMAHA Products, are already

Advertisement

Table of Contents
loading

Related Manuals for Yamaha MDX-595

Summary of Contents for Yamaha MDX-595

  • Page 1: Table Of Contents

    CANCEL ENTER IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.

  • Page 2: To Service Personnel

    MDX-595 TO SERVICE PERSONNEL 1. Critical Components Information. AC LEAKAGE Components having special characteristics are marked Z WALL EQUIPMENT TESTER OR and must be replaced with parts having specifications equal UNDER TEST OUTLET EQUIVALENT to those originally installed. 2. Leakage Current Measurement (For 120V Models Only).

  • Page 3: Rear Panels

    MDX-595 English THIS PRINTING (SEE POSITION SHOWN IN THE ILLUSTRATION) INFORMS THE USER THAT THE APPARATUS CONTAINS A LASER COMPONENT. THIS LABEL (SEE POSITION SHOWN IN THE ILLUSTRATION) WARNS THAT ANY FURTHER PROCEDURE WILL BRING THE USER INTO EXPOSURE WITH THE LASER BEAM.

  • Page 4: Specifications

    MDX-595 SPECIFICATIONS Digital audio system Outputs System LINE OUT (PLAY) Type: pin jack MiniDisc digital audio system Disc Standard output level: 2.0 ± 0.5 Vrms MiniDisc DIGITAL OUT (OPTICAL) Type: square optical connector jack Recording method Magnetic field variation overwrite...

  • Page 5: Internal View

    MDX-595 INTERNAL VIEW POWER TRANSFORMER P.C.B. DIGITAL P.C.B. MAIN (1) POWER SWITCH MD MECHANISM UNIT P.C.B. MAIN (2) CB401 DISASSEMBLY PROCEDURES (Remove parts in disassembly order as numbered.) 3. Removal of MD Mechanism Unit 1. Removal of Top Cover a. Remove 1 connector.
  • Page 6 MDX-595 Disassembly of MD Mechanical Unit Remove the MD mechanical unit according to Steps 1 ~ 3 of the disassembly procedure (page 4). Removal of MD Main P.C.B. (Fig. 3) 1. Remove 4 screws (Q1). 2. Remove 6 connectors (Q2).
  • Page 7 MDX-595 Removal of Cartridge Holder (Fig.6) 1. Open the roller arm lever in the arrow direction and move the clamper lever to the rear. 2. With a +5V voltage (*2) applied to the red line side of the blue connector of the loading motor, push the rack gear in the arrow direction until the cam plate lever clicks.
  • Page 8 MDX-595 (E1)x1 Removal of Mechanism SW P.C.B. (Fig.7) Ø1.7x3mm • Once the mechanism switch P.C.B. is removed, it will (E1)x1 be necessary to perform “Adjustment of Lead-in Switch Ø1.7x9.5mm Position”. (See page 13.) Mechanism SW P.C.B. 1. Remove 2 screws (E1) and then remove the Mecha- nism SW P.C.B.
  • Page 9 MDX-595 Removal of Spindle Motor (Fig.9) • Once the spindle motor is removed, it will be neces- sary to perform “Pickup Rating”. (See page 14.) 1. Remove 3 screws (C1). 2. Remove the spindle motor by moving it in the arrow direction.

  • Page 10: Adjustment & Test Mode

    MDX-595 ADJUSTMENT & TEST MODE Preparation before Adjustment Test disc Extension cable (see connection diagram on page 14.) Type Test disc Type Part No. High reflecting disc TDYS1 (SONY) [for reproduction] (P/No. TX945850) 1. Extension P.C.B. for servicing TX946230 Low reflecting disc Commercially available mini disc for recording 2.
  • Page 11 MDX-595 Description of TEST modes 1. AUTO pre-adjustment mode Automatic pre-adjustment is performed. (Grating adjustment mode after this adjustment.) [ _ AUT _ YOBI _ ] Adjusted values are output by using the interface. 2. AUTO adjustment mode Automatic adjustment is performed.
  • Page 12 MDX-595 2. AUTO adjustment mode Step Setting method Remark Display Set the TEST mode to STOP. No disc is loaded. [ EJECT ] Load a disc. AUTO pre-adjustment menu [ LOADING ] Press the DISPLAY button once. AUTO adjustment menu...
  • Page 13 MDX-595 9. TEST-REC mode Use a disc for confirmation of recording function. (It is used to check the REC function at the specified address.) Step Setting method Remark Display Load a disc. AUTO pre-adjustment menu [ _ AUT _ YOBI _ ] Press the TITLE button twice.
  • Page 14 MDX-595 Lead-in switch position measurement mode Load a TDYS1 disc for reproduction (high reflecting disc). Note) Adjust the position of the lead-in switch to FF85 ~ FFD2. 1. Loosen 2 screws (A) fixing the mechanism switch P.C.B. 2. Retighten screws while pushing the mechanism switch P.C.B. in the arrow (<-) direction and then measure the position of the lead-in switch again.
  • Page 15 MDX-595 MECHANISM ADJUSTMENT When making adjustment, be sure to connect an extension cable for servicing and an expansion P.C.B. as shown in Fig.16. 1. Optical pickup rating inspection method (Externally attached) Oscilloscope GND (TP1125) IC1101 No.43 pin 100K EOUT (TP1129) IC1101 No.26 pin...
  • Page 16 PROCEDURE TO WRITE DATA INTO EE-PROM (IC1402) 1. Procedure to change the EE-PROM and write the (5) Press the DISPLAY button 4 times. initial value of the microprocessor into EE-PROM Temp (1) Replace the EE-PROM. (6) Press the SET/ENTER button. [ TEMP (2) Refer to the latest “List of EE-PROM contents”.
  • Page 17 Slide setting Control setting Item on display Set value Item on display Set value CONTROL1 CONTROL2 SLDLIM SPKLEVm SLDLEV ADJTTM SLKLVk HDEQAD SLKLVt LDEQAD SLKLVm GDEQAD HDEQBC LDEQBC Adjust setting GDEQBC Item on display Set value HALSG LALSG GALSG HALSOFS LALSOFS GALSOFS EE-PROM SETTING MODE TRANSITION DIAGRAM...

  • Page 18: Special Test Mode

    MDX-595 SPECIAL TEST MODE How to set to the special test mode Press the POWER button while pressing the SET/ENTER button and the STOP button. Then all the indicators will light up. Operation procedure Every time the SET/ENTER button is pressed, lighting of indicators and items on the display change as follows.

  • Page 19: Error Display

    MDX-595 MDX-793 ERROR DISPLAY Error on display Description Countermeasure Can't REC • DEFECT occurred 10 times continuously during REC- • Check that the disc is free from scratch, dust, PLAY. finger print, black spot, etc. and that decentering, face deflection, etc. are not •...
  • Page 20 MDX-595 Error on display Description Countermeasure Can' t Edit • Editing conditions were not satisfied with respect to • Wrong operation procedure was used. Try each editing function. again by using the correct procedure. TMP Over!! • The temperature in the set (MD unit) went up exces- •...

  • Page 21: Troubleshooting

    MDX-595 TROUBLESHOOTING When MD fails to operate When the objective lens of the optical pickup becomes dirty, MD may fail to operate. Clean the objective lens first and check MD for reproduction function. If it still fails to operate, check according to the following flow charts.
  • Page 22 MDX-595 Disc cannot be loaded properly. Does the loading function work properly when a disc is inserted? Does No.4 pin of CN1901 become “L”? Check CN1901 and SW1956. Does a change occur at either No.1 or 28 pin of IC1601? Check IC1401.
  • Page 23 MDX-595 Normal reproduction Applicable when the E2-PROM value has been confirmed as normal in the test mode Is initialization done properly for reproduction of a high reflecting disc? Does the play time display count up properly? Check IC1201. Is the disc turning properly?
  • Page 24 MDX-595 Recording/reproduction function Load a low reflection disc and after confirming the audio output in the normal reproduction mode, execute recording/reproduction. Does the recording function fail from the starting address? Check that the disc is not in the recording inhibited status.
  • Page 25 MDX-595 Disc motor does not run. Check No.24 and 25 pins of IC1201 as well as soldering Is a correct waveform provided at No.24 and 25 pins of IC1201 and parts of the peripheral circuit. during the focus gain rough adjustment step in the test mode? Is a waveform provided at No.11 and 12 pins of IC1601 as...

  • Page 26: Ic Data

    MDX-595 IC DATA IC1101 : IR3R55 RF Signal Processing ADIPI ADIPO DIFF DIFF ADLPFO ADIP REFI 22KO REFO 22KI BIAS RFADD TCGI TCGO AOUT BOUT EOUT LOGIC FOUT Pin Name Function RF signal input terminal 1 to input RF signal output from pickup...
  • Page 27 MDX-595 IC1201 : LR376484 ATRAC Encoder/Decoder 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 EFMO TOTMON PLCK TEMON ACRCER SBCK TCRS RAD0 SBSY...
  • Page 28 MDX-595 IC1201 : LR376484 ATRAC Encoder/Decoder Pin Name Function RAA7 Address output to external D-RAM. ADR7 Address output to external D-RAM. ADR8 RAA8 Data output enable signal output to external D-RAM RAOEX Ground terminal for digital section DGND RACASX Column address strobe signal output to external D-RAM Data input/output with external D-RAM.
  • Page 29 MDX-595 IC1401 : iX0290AW MD System Microprocessor Function Pin Name Input/output port P96 Input/output port P95 SBCK LDVAR (Laser power adjustment output) LDVAR ADJS (for automatic adjustment step check) ADIS Input/output port P92 SFSY LOADIN LD SW CK input (interrupt input only when used individually)
  • Page 30 MDX-595 IC1401 : iX0290AW MD System Microprocessor Pin Name Function P37/A15 Input/output port P37 Input/output port P36 Input/output port P35 EEPRO EEPRO (E2PROM protect cancel) EPCS EPCS (E2PROM chip selector output) EEPD EEPD (E2PROM serial data output) EEPK EEPK (E2PROM serial clock output) +3.15V...
  • Page 31 MDX-595 IC6 : M30622M8-xxxFP Main System Microprocessor /CS0 /CS1 /CS2 /CS3 /WRL/WR /WRH/BHE /BCLK /HLDA /HOLD /ALE /RDY/CLK /CTS /RTS /CLK /RXD /TXD /CTS /RTS /CTS /CLKS /CLK /RXD /TXD Port Name Function P96/ANEX1 Data to DEQ Clock to DEQ...
  • Page 32 MDX-595 IC6 : M30622M8-xxxFP Main System Microprocessor Port Name Function P63/TxD0 KDATA MD key data P62/RxD0 MDDATA MD data input P61/CLK0 DSCK MD clock output P60//CTS0,/RTS0 MD-ST MD start (MD-ON) P57//RDY,CLKout /MD-RES MD reset output P56/ALE Unused (GND) P55//HOLD SEARCH...
  • Page 33 MDX-595 IC703 : YM3436DK DIR (Digital Format Interface Receiver) 24 26 28 25 17 15 14 13 12 31 DAUX HDLT EXTW SYSTEM DOUT CLOCK TSTN TIMING SYNC GENERATOR SYNC CTLP D DIN DATA CLOCK (N.C.) EIAJ (AES/EBU) CONTROLLER DIGITAL AUDIO...
  • Page 34 MDX-595 IC704 : YM6104 DEQ (Digital Equalizer) SERIAL INPUT DATA BUFFER INPUT 8 WORDS PARAMETER CONTROL COEFFICIENT MULTIPLIER MICRO TRANSFER PROGRAM ACCUMULATOR BUFFER RANDOM Q SHIFTER NUMBER Q REGISTER GENERATOR SERIAL OUTPUT 7 WORDS DATA BUFFER OUTPUT 8 WORDS DATA RAM...
  • Page 35 MDX-595 IC705 : YM3437C-FE2 DIT (Digital Audio Interface Signal Transmitter) DOUT MCLK CNTR/BLKIN CLD/AUXEN RSTN CIN/UDB WCIN CCK/CSB MUTE MCLK DM0,DM1 WCIN TIMING GENERATION INPUT DATE FORMAT CONVERSION BI-PHASE DOUT MODULATION CCK/CSB CIN/UDB CONTROL CODE CLD/AUXEN CONVERSION CNTR/BLKIN Pin No.

  • Page 36: Block Diagram

    MDX-595 BLOCK DIAGRAM (MD)
  • Page 37 MDX-595 BLOCK DIAGRAM R.OUT L.OUT R.IN BUFFER BUFFER L.IN LEVEL AVCC Va+6V VR202 /LOADIN 6.5/5V +6.5/5V 6.5/5V (MDM-98A) DSTB MDDATA KDATA ANALOG SEARCH DECK MD-ST RESET PDOWN BACKUP DIGIN D1,2 DIGOUT PHONES PHONES LEVEL VR201 DIGITAL OPTICAL PHONES IC201 MUTE...
  • Page 38 MDX-595 TEST POINT WAVEFORM Stopped PLAY PIT PLAY PLAY Stopped NORM: 1k S/s 1997 / 08 / 04 14:19:52 Stopped Stopped NORM: 1M S/s NORM: 100M S/s 1997 / 08 / 04 13:35:24 1997 / 08 / 04 11:23:12 NORM: 100M S/s...

  • Page 39: Test Point Waveforms

    MDX-595 PRINTED CIRCUIT BOARD (Foil side) Note : y ~ o : TEST POINT WAVEFORMS (See page E38/J36) Connect an oscilloscope to the test points (y ~ o) through a filter as shown below. 100K test points oscilloscope MD MAIN PWB-A (BOTTOM VIEW)
  • Page 40 MDX-595 PRINTED CIRCUIT BOARD (Foil side) ANALOG DIGITAL(OPTICAL) P.C.B. MAIN (1) DGND DIG1 DIG2 /DITRES ERRD /DIRRES LOCKN XCLK /CRS DIG3 /DEORES DITMUTE DGND DIGout GNDd J only DIGin PDOWN /MD-RES MD-ST Point q (Pin 13 of IC6) DSCK SEARCH...

  • Page 41: Printed Circuit Board

    MDX-595 PRINTED CIRCUIT BOARD (Foil side) P.C.B DIGITAL P.C.B DIGITAL (Lead Type Device) (Surface Mount Device) Point e (Pin 13 of IC703) DITMUTE V : 2V/div H : 50 nsec/div /DEQRES N.C. DC range 1 : 1 probe DIG3 /CRS...
  • Page 42 MDX-595 PRINTED CIRCUIT BOARD (Foil side) FROM: MAIN (1) P.C.B. MAIN (6) P.C.B. MAIN (5) TIMER EJECT PLAY REC STOP PLAY/ PAUSE INPUT DIGITAL EDIT DELETE TITLE DISPLAY RAMDOM ENTER CANCEL SEARCH REC LEVEL SCROLL A - B S - F CHARA.
  • Page 43 NDX-595 IC1202 : IX2474AF SCHEMATIC DIAGRAM : TEST POINT WAVEFORMS (See page E38/J36) 4M Bit D-RAM MD MAIN PWB-A Write Clock Clock Generator Note : y ~ o Generator TP1215 TP1218 Connect an oscilloscope to the test points (y ~ o) through a Data Input CBR Refresh SELF Refresh...

  • Page 44: Schematic Diagram

    NDX-595 IC3 : NJM5532M IC201 : BA15218N SCHEMATIC DIAGRAM IC4 : NJM2068D-D Dual OP-Amp Dual OP-Amp – – –IN – – –IN –V MUTING IC1 : TC74HCT04AP P-E48/J46 Hex Inverters -6.0 -6.0 [K-7] -6.0 -6.0 -6.1 IC2 : TC74HC153AP Dual 4 to 1 Data Selectors BUFFER BUFFER STROBE...
  • Page 45 NDX-595 IC701 : NJM2904M-T1 IC706 : TC74VHC04F IC702 : HD74HC02FPEL SCHEMATIC DIAGRAM Dual OP-Amp Hex Inverters Quad 2 Input NOR –IN – – –IN –V P-E49/J47 [A-4] Point e (Pin 13 of IC703) V : 2V/div H : 50 nsec/div DC range 1 : 1 probe * All voltages are measured with a 10MΩ/DC electric volt meter.
  • Page 46 NDX-595 IC601 : LC75710NE SCHEMATIC DIAGRAM FL Driver AM32 AM31 AM30 AM29 AM28 AM27 AM26 TEST AM25 AM24 OSCO AM23 OSCI AM22 AM21 AM20 AM19 AM18 AM17 SHIFT DC RAM REGISTER ADDRESS ADDRESS AM35 -26.9 REGISTER COUNTER -26.9 BLINKCYCLE BLINK REGISTER GENERATOR -26.9...

  • Page 47: Parts List

    MDX-595 P ARTS LIST WARNING Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ELECTRICAL PARTS Carbon resistors (1/6W or 1/4W) are not included in the ELECTRICAL PARTS List. For the part Nos. of the carbon resistors, refer to the last page.
  • Page 48 MDX-595 P.C.B. MAIN Schm Schm Ref. PART NO. Description Ref. PART NO. Description V3548300 P.C.B. MAIN(U) UR837100 C.EL 10uF V3548400 P.C.B. MAIN(BG) UA952220 C.MYLAR 220pF V3733000 CN UR866100 C.EL * C43 UR846470 C.EL 4.7uF VT707200 L.EMIT TOTX178 VT620100 L.DTCT TORX178A UA952560 C.MYLAR...
  • Page 49 MDX-595 P.C.B. MAIN Schm Schm Ref. PART NO. Description Ref. PART NO. Description VD631600 DIODE 1SS133,176,HSS104 iC287820 2SC2878 A,B VD631600 DIODE 1SS133,176,HSS104 iC287820 2SC2878 A,B VM974400 DIODE.ZENR HZS6B2TD 6.0V iA093320 2SA933S Q,R iD040040 2SD400 * D6 VM973800 DIODE.ZENR HZS4B2TD 4.0V...
  • Page 50 MDX-595 P.C.B. MAIN Schm Schm Ref. PART NO. Description Ref. PART NO. Description VR519500 SHEET * IC706 XM332A00 IC TC74VHC04F EL INV V3747400 SPACER.FL T4x6x18 Q701 iC174020 2SC1740S R,S EG330030 SCR.BND.HD 3x6 FCRM3-BL * Q702 VC123900 TR.DGT DTA143EK * Q703 VG730700 TR.CHP...
  • Page 51 MDX-595 P.C.B. MD MAIN Schm Schm Ref. PART NO. Description Remarks Ref. PART NO. Description Remarks AAX02260 P.C.B. MAIN 92LPWB2976MDSS * C1504 AAX02570 C.CHP 220pF VCCCCY1HH221J * C1505 AAX02540 C.CHP 100pF VCCCCY1HH101J * C1100 AAX02530 C.CHP 4.7uF RCKZ0003AWZZ * C1101 AAX02750 C.CHP...
  • Page 52 MDX-595 P.C.B. MD MAIN Schm Schm Ref. PART NO. Description Remarks Ref. PART NO. Description Remarks * D1300 AAX02470 DIODE SB0209CP VHDSB0209CP1 * R1111 AAX01910 R.CAR.CHP 22KΩ 1/16W VRSCY1JB223J * R1112 AAX01910 R.CAR.CHP 22KΩ 1/16W VRSCY1JB223J * D1301 AAX02470 DIODE...
  • Page 53 MDX-595 P.C.B. MD MAIN & OTHER Schm Schm Ref. PART NO. Description Remarks Ref. PART NO. Description Remarks * R1423 AAX01760 R.CAR.CHP 10KΩ 1/16W VRSCY1JB103J * R1706 AAX01790 R.CAR.CHP 1MΩ 1/16W VRSCY1JB105J * R1707 AAX01750 R.CAR.CHP 1KΩ 1/16W VRSCY1JB102J * R1424 AAX01760 R.CAR.CHP...
  • Page 54 MDX-595 EXPLODED VIEW 1-32 1-32 1-21 1-32 1-17 1-16 1-13 1-12 1-11 2 (6) 1-32 1-27 1-32 1-24 2 (2) 1-26 1-32     1-22 200-1 1-15 1-23 1-32 1-31...
  • Page 55 MDX-595 MECHANICAL PARTS Ref. Ref. PART NO. Description Remarks Markets PART NO. Description Remarks Markets * 1- 5 MF119200 FLEXIBLE FLAT CABLE 19P 200mm ACCESSORIES * 1-11 V3080200 FRONT PANEL * 200 VZ480500 REMOTE CONTROL TRANSMITTER * 1-11 V3080300 FRONT PANEL...
  • Page 56 MDX-595 EXPLODED VIEW (MD Mechanism Unit) MECHANICAL PARTS (MD Mechanism Unit) Ref. PART NO. Description Remarks Markets V3098100 MD RECORDER UNIT V3098100 AAX02240 MD GUIDE LANGF0033AWZZ AAX02250 MD GUIDE LANGF0034AWZZ AAX02930 DRIVE CHASSIS LCHSM0080AWM1 AAX02270 CARTRIDGE HOLDER LHLDX3004AWM1 AAX02280 CAM PLATE LEVER...
  • Page 57 MDX-595 Ref. PART NO. Description Remarks Markets * 609 AAX01620 WASHER 1.2x3x0.2 LXWZ9269AFZZ * 610 AAX02990 SCREW M1.7x2.1 LXBZ0036AWZZ * 611 AAX01270 SCREW M1.7x8.9 LXBZ0852AFFD * 612 AAX01290 SCREW M2x4 XBPSD20P04K00 * 613 AAX01300 SCREW M1.7x3 XSPSN17P03K00 * CNW2002 AAX02110 MD FLAT CABLE...

  • Page 58: Grease Application Diagram

    MDX-595 GREASE APPLICATION DIAGRAM Grease : Molykote PG664 GB : Molykote BR2PLUS OL : HYDRO-FLUTE EP-68...

  • Page 59: Remote Control Transmitter

    MDX-595 REMOTE CONTROL TRANSMITTER SCHEMATIC DIAGRAM KI/O8 KI/O5 IED1 KI/O7 KI/O4 KI/O3 SI/LED KI/O2 KI/O1 KI/O0 XOUT 455KHz RESET 3(V) 2.2Ω 47µF 220pF 220pF CUSTOM CODE C0 C1 C2 C3 C4 C5 C6 C7...
  • Page 60 MDX-595 Parts List for Carbon R esistors 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. Value 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 3180 7110 1.8 Ω...

Table of Contents