Epson ET-8500, ET-8550 - All-In-Ones Printer Quick Installation Guide

Also See for ET-8500:

User manual (284 pages)

Quick start manual (4 pages)

User manual (347 pages)

Table of Contents

Contents

1 Unpack
2 Fill ink tanks
3 Load paper
4 Install software
5 Setup from a mobile device
6 Mobile and voice-activated printing
7 Any problems?
8 Any questions
- 8.1 Technical support
- 8.2 Recycling
9 Need paper and ink
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Epson ET-8500, ET-8550 - All-In-Ones Printer Quick Installation Guide

Unpack

Note:

Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.
The CD/DVD tray is on the bottom of paper cassette 2.

Remove all protective materials from the product.
Lift up the scanner unit and remove all protective materials from inside the product.

Do not touch the areas shown inside the product. The printer ships with the transportation lock in the printing position. Do not move it from the printing position.

Connect the power cord to the back of the product and to an electrical outlet.

Do not connect to your computer yet.

You can set up your product to print and scan wirelessly from your mobile device or computer using the Epson Smart Panel app. To use the app, see "Setup from a mobile device" on the back of this sheet. If you do not want to use the app for setup, go to the next section.

Fill ink tanks

Keep the ink bottles out of the reach of children and do not drink the ink.

This product requires careful handling of ink. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.

Note:

Epson cannot guarantee the quality or reliability of third-party ink.
Use the ink bottles included with the printer to set up the product. Part of the ink will be used to charge the print head. These bottles may print fewer pages compared with replacement ink bottles.
Epson strongly recommends the use of genuine ink to ensure optimal print quality and performance.

Press the power button to turn on the product.

Note: If an error message appears, turn off the product and check that no protective material has been left inside the product and that the transportation lock is in the printing position.
Select your language on the LCD screen.
Note: You can change this setting later using the product's control panel.
Open the ink tank cover, then open the cap for the black (BK) ink tank.

Note: Refer to the label above the ink tank to identify the color of each tank.
Unpack the black (BK) ink bottle. Hold the ink bottle upright and slowly turn the bottle cap to remove it.

Do not shake or squeeze the ink bottles. Do not touch the top of the ink bottle after its cap is removed.

Insert the ink bottle into the filling port.

Note: Do not force the bottles into position; they are keyed for each color.
Wait for the ink to fill the tank. Do not squeeze the bottle.

Note: Ink flows into the tank and stops automatically when the ink is filled to the upper line. If ink does not flow from the bottle, lift and reinsert the bottle.
When the ink tank is full, remove the ink bottle and securely close it with the cap. If any ink remains in the bottle, close the bottle and store it for later use.

Note: Do not leave the ink bottle inserted; otherwise the bottle may be damaged or ink may leak.
Securely close the black ink tank cap.
Repeat the previous steps for the other colors.
Close the ink tank cover and lower the scanner unit.
When the message to see the Start Here sheet appears on the LCD screen, press and hold OK for 5 seconds.
Follow the instructions on the LCD screen and select Start to start charging the ink. Ink charging takes approximately 7 minutes.

Do not unplug or turn off the product, raise the scanner unit, or load paper while the product is charging or you'll waste ink.
Charging precaution

Note: The included ink bottles are designed for reliable printer setup and cannot be resold. After setup, the remaining ink is available for printing.

Follow the on-screen instructions to adjust the print quality of your product.

Note:

You need to load paper before you can adjust the print quality. See "Load paper" for details.
You can change these settings later using the product's control panel.

After setup, periodically inspect the ink levels to ensure they are not below the lowest line on the tanks. Prolonged use when ink is below the lowest line could damage the product.

Load paper

See the instructions below for loading paper in cassettes 1 and 2.
Loading the paper in cassettes

Make sure the product is done charging the ink, and then lower the front cover.
Pull out the paper cassette for the paper you are loading.
Slide the edge guides out.
Insert paper with the glossy or printable side facedown.

Note: past the triangle symbol at the end of the cassette.
Slide the edge guides against the paper, but not too tightly. Make sure the paper is under the tabs on the edge guides.
Keep the cassette flat as you insert it all the way.

Note: automatically extend after you send a print job. After printing, select Output Tray on the home screen to close the output tray.
Select the paper settings on the product's control panel.

Install software

Note:

If you are using a Mac or your computer does not have a CD/DVD drive, an Internet connection is required to obtain the product software.
To print from a Chromebook, go to www.epson.com/support/chromebookprint (U.S.) or www.epson.ca/support/chromebookprint (Canada) for instructions.

Make sure the product is NOT CONNECTED to your computer.
Windows: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
Insert the product CD (Windows only) or download and run your product's software package. For the latest software, visit:
ET-8500
www.epson.com/support/et8500 (U.S.)
www.epson.ca/support/et8500 (Canada)
ET-8550
www.epson.com/support/et8550 (U.S.)
www.epson.ca/support/et8550 (Canada)
Follow the instructions on the computer screen to run the setup program.
When you see the Select Your Connection screen, select one of the following:

Wireless connection
In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet cable (not included).

Setup from a mobile device

Note: For additional information on the Epson Smart Panel app, visit www.epson.com/support/smartpanel (U.S.) or www.epson.ca/support/smartpanel (Canada).

Download the Epson Smart Panel app from your device's app store. Do not launch the app yet.

Press the power button to turn on the product.
Launch the app and follow its instructions to set up your product.

Mobile and voice-activated printing

Print directly from your Android (v4.4 or later) device*. Simply connect your printer and device to the same network and tap the menu icon to select the print option.
Turn your mobile device into an intuitive, easy-to-use printing and scanning control center with Epson Smart Panel. Download the app from your mobile device's app store.
Print remotely with Epson Connect. Learn more at www.epson.com/connect (U.S.) or www.epson.ca/connect (Canada).
Use voice-activated assistants to print a variety of creative and everyday items from your Epson product. Simply add your product to an Epson Connect account, then link the account to a voice-activated assistant. See www.epson.com/voice (U.S.) or www.epson.ca/voice (Canada) for more information.

* May require the Epson Print Enabler or Mopria Print Service app from Google Play.

Any problems?

Network setup was unsuccessful

Print a network connection report to identify network problems and solutions.
Make sure you select the right network name (SSID).
If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Be sure to enter your password in the correct case.
Restart your router (turn it off and then on), then try to connect to it again.
If you see a firewall alert message, click Unblock or Allow to let setup continue.

There are lines or incorrect colors in my printouts

Run a nozzle check to see if there are any gaps in the printout. Then clean the print head, if necessary.

The product's screen is dark

Make sure your product is turned on and touch the screen to wake it from sleep mode.

Setup is unable to find my product after connecting it with a USB cable.
Make sure your product is on and the USB cable is securely connected.

Any questions

Technical support

Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download drivers, view videos and manuals, get FAQs, or contact Epson.

Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Recycling

Epson offers a recycling program for end-of-life hardware and ink bottles. Please go to www.epson.com/recycle (U.S.) or www.epson.ca/recycle (Canada) for information on how to return your products for proper disposal.

Need paper and ink

Ensure brilliant results with Epson specialty and plain papers, engineered specifically for Epson printers. Find Epson papers and Epson Genuine Ink at www.epson.com (U.S. sales) or www.epson.ca (Canadian sales) and at Epson authorized resellers. Call 800-GO-EPSON (800-463-7766).

ET-8500/ET-8550 replacement inks
Ink family: 552
Black	Photo Black	Cyan	Yellow	Magenta	Gray

EPSON and Epson Smart Panel are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Connect is a trademark of Seiko Epson Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Chromebook, and Google Play are trademarks of Google LLC.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.

The illustrations show the ET-8500, but the steps are the same for the ET-8550, unless otherwise specified.