Sony CFD-E10 Operating Instructions
Personal audio system
Hide thumbs
Also See for CFD-E10:
- Service manual (34 pages) ,
- Operating instructions manual (9 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Troubleshooting
General
Radio
The power does not
The audio is weak or
come on.
has poor quality.
• Connect the AC power adaptor
• Replace all the batteries with new
securely.
ones if they are weak.
• Make sure the batteries are inserted
• Move the player away from the
correctly.
TV.
• Replace all the batteries with new
The picture of your TV
ones if they are weak.
becomes unstable.
There is no audio.
• If you are listening to an FM
• Unplug the headphones when
program near the TV with an
listening through speakers.
indoor antenna, move the player
away from the TV.
Noise is heard.
• Someone is using a portable
After trying the above remedies, if
telephone or other equipment that
you still have problems, unplug the
emits radio waves near the player.
AC power adaptor and remove all the
tMove the portable telephone,
batteries. After all the indications in
etc., away from the player.
the display disappear, plug the AC
power adaptor and insert the batteries
CD Player
again. If the problem persists, please
consult your nearest Sony dealer.
The CD does not play
or "– –" lights in the
display even when a
CD is in place.
• Place the CD with the label surface
facing you.
• Clean the CD.
• Take out the CD and leave the CD
compartment open for about an
hour to dry moisture condensation.
• The CD-R/CD-RW was not
finalized. Finalize the CD-R/CD-
RW with the recording device.
• There is a problem with the quality
of the CD-R/CD-RW, recording
device or application software.
The sound drops out.
• Reduce the volume.
• Clean the CD, or replace it if the
CD is badly damaged.
• Place the player in a location free
from vibration.
• Clean the lens with a commercially
available blower.
• The sound may drop out or noise
may be heard when using poor
quality CD-Rs/CD-RWs or if there
is a problem with the recording
device or application software.
Lens
Precautions
On safety
On operation
• As the laser beam used in the CD
• If the player is brought directly
player section is harmful to the
from a cold to a warm location, or
eyes, do not attempt to disassemble
is placed in a very damp room,
the casing. Refer servicing to
moisture may condense on the
qualified personnel only.
lenses inside the CD player section.
• Should any solid object or liquid
Should this occur, the player will
fall into the player, unplug the
not operate properly. In this case,
player, and have it checked by
remove the CD and wait about an
qualified personnel before
hour for the moisture to evaporate.
operating it any further.
• Discs with non-standard shapes
If you have any questions or
(e.g., heart, square, star) cannot be
problems concerning your player,
played on this player. Attempting
please consult your nearest Sony
to do so may damage the player.
dealer.
Do not use such discs.
Notes on CDs
Cleaning the cabinet
• Before playing,
• Clean the cabinet, panel and
clean the CD
controls with a soft cloth slightly
with a cleaning
moistened with a mild detergent
cloth. Wipe the
solution. Do not use any type of
CD from the
abrasive pad, scouring powder, or
center out.
solvent, such as alcohol or benzine.
• Do not use solvents such as
benzine, thinner, commercially
On power sources
available cleaners or anti-static
• For AC
spray intended for vinyl LPs.
operation, use
• Do not expose the CD to direct
the supplied
sunlight or heat sources such as hot
AC power
Polarity of
air ducts, nor leave it in a car
adaptor; do not
the plug
parked in direct sunlight as there
use any other type.
can be a considerable rise in
• The player is not disconnected
temperature inside the car.
from the AC power source (mains)
• Do not stick paper or sticker on the
as long as it is connected to the
CD, nor scratch the surface of the
wall outlet, even if the player itself
CD.
has been turned off.
• After playing, store the CD in its
• Unplug the player from the wall
case.
outlet when it is not to be used for
If there is a scratch, dirt or
an extended period of time.
fingerprints on the CD, it may cause
• For battery operation, use four size
tracking error.
AA (R6) batteries.
• When the batteries are not to be
used, remove them to avoid
damage that can be caused by
battery leakage or corrosion.
• The nameplate indicating operating
voltage, power consumption, etc. is
located at the bottom.
On placement
• Do not leave the player in a
location near heat sources, or in a
place subject to direct sunlight,
excessive dust or mechanical
shock.
• Do not place the player on an
inclined or unstable place.
• Do not place anything within 10
mm of the side of the cabinet. The
ventilation holes must be
unobstructed for the player to
operate properly and prolong the
life of its components.
• If the player is left in a car parked
in the sun, be sure to choose a
location in the car where the player
will not be subjected to the direct
rays of the sun.
• Since a strong magnet is used for
the speakers, keep personal credit
cards using magnetic coding or
spring-wound watches away from
the player to prevent possible
damage from the magnet.
WARNING
To prevent fire or
Personal
shock hazard, do not
expose the player to
Audio
rain or moisture.
System
Operating Instructions
This symbol is intended
to alert the user to the
presence of uninsulated
"dangerous voltage"
within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of
electric shock to persons.
This symbol is intended
to alert the user to the
presence of important
CFD-E10
operating and
maintenance (servicing)
instructions in the
Sony Corporation ©2002
literature accompanying
Printed in China
the appliance.
3-234-994-11(1)
Specifications
CD player section
General
System
Speaker
Compact disc digital audio system
Full range: 5.7 cm dia., 2.7 , cone
type (2)
Laser diode properties
Outputs
Material: GaAlAs
Headphones jack (stereo minijack)
Wave length: 780 nm
For 8 - 32 ohms impedance
Emission duration: Continuous
headphones
Laser output: Less than 44.6 µW
Power output
(This output is the value measured at a
1 W + 1 W (at 2.7
, 10 % harmonic
distance of about 200 mm from the
objective lens surface on the optical
distortion in AC operation)
pick-up block with 7 mm aperture.)
Power requirements
Spindle speed
DC IN 6 V accepts:
Supplied AC power adaptor for use
200 r/min (rpm) to 500 r/min (rpm)
with 120 V AC, 60 Hz
(CLV)
6 V DC, 4 size AA (R6) batteries
Number of channels
Power consumption
2
Frequency response
DC 11.5 W
Battery life
20 - 20,000 Hz +1/–2 dB
When playing a CD:
Wow and flutter
Sony R6P: approx. 2 hours
Below measurable limit
Sony alkaline LR6: approx 4 hours
Radio section
Dimensions
Frequency range
Approx. 315 131 70 mm (w/h/d)
FM: 87.5 - 108 MHz
(12
5
⁄
5
1
⁄
2
7
⁄
inches) (incl.
8
4
8
AM:530 - 1,710 kHz
projecting parts)
Antennas
Mass
FM: Telescopic antenna
Approx. 920 g (2 lb.) (incl. batteries)
AM: Built-in ferrite bar antenna
Supplied accessory
AC power adaptor (1)
Design and specifications are subject to
change without notice.
Optional accessories
Sony MDR headphone series
CAUTION
equipment off and on, the user is
encouraged to try to correct the
The use of optical instruments
interference by one or more of the
with this product will increase eye
following measures:
hazard.
— Reorient or relocate the
WARNING
receiving antenna.
Do not install the appliance in a
— Increase the separation
confined space, such as a
between the equipment and
bookcase or built-in cabinet.
receiver.
To prevent fire or shock hazard,
— Connect the equipment into an
do not place objects filled with
outlet on a circuit different
liquids, such as vases, on the
from that to which the receiver
appliance.
is connected.
Information
— Consult the dealer or an
experienced radio/TV
For customers in the USA
technician for help.
This equipment has been tested
You are cautioned that any
and found to comply with the
changes or modifications not
limits for a Class B digital device,
expressly approved in this manual
pursuant to Part 15 of the FCC
could void your authority to
Rules. These limits are designed
operate this equipment.
to provide reasonable protection
Owner's Record
against harmful interference in a
residential installation. This
The model number is located at
equipment generates, uses and can
the bottom and the serial number
radiate radio frequency energy
is located in the battery
and, if not installed and used in
compartment.
accordance with the instructions,
Record the serial number in the
may cause harmful interference to
space provided below. Refer to
radio communications. However,
these numbers whenever you call
there is no guarantee that
upon your Sony dealer regarding
interference will not occur in a
this product.
particular installation. If this
Model No. CFD-E10
equipment does cause harmful
Serial No. __________________
interference to radio or television
reception, which can be
determined by turning the
For customers in the USA
Please register this product on line at http://www.sony.com/
productregistration.
Proper registration will enable us to send you periodic mailings about
new products, services and other important announcements.
Registering your product will also allow us to contact you in the
unlikely event that the product needs adjustment or modification.
Thank you.
Advertisement
Related Manuals for Sony CFD-E10
Summary of Contents for Sony CFD-E10
-
Page 1: Troubleshooting
For customers in the USA Please register this product on line at http://www.sony.com/ productregistration. General Speaker Proper registration will enable us to send you periodic mailings about Full range: 5.7 cm dia., 2.7 , cone... -
Page 2: Playing A Cd
Location of controls Choosing Power Sources i (headphones) TUNING Connecting the AC power adaptor MEGA BASS FUNCTION VOL* POWER PLAY MODE OPR/BATT Using the player on batteries Insert four size AA (R6) batteries (not supplied) into PUSH CLOSE Display the battery compartment. To release the battery DC IN 6V Press the # side of the battery and then take out the...