Related Manuals for Toro 22590
Summary of Contents for Toro 22590
- Page 1 Form No. 3460-579 Rev A Grapple Bucket Compact Tool Carriers Model No. 22590—Serial No. 400000000 and Up *3460-579* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Figure 1 The grapple bucket is a load-bearing attachment 1. Model and serial number location intended to be used on a Toro compact tool carrier. It is designed primarily for grabbing, dragging, lifting, and removing materials without picking up topsoil Model No.
-
Page 3: Table Of Contents
Contents Safety Safety ............... 3 DANGER General Safety ........... 3 Slope Safety ............4 There may be buried utility lines in the work Grapple Bucket Safety........4 area. Digging into them may cause a shock Maintenance and Storage Safety......4 or an explosion. -
Page 4: Slope Safety
Slope Safety • Do not remove or add attachments on a slope. • Do not park the machine on a hillside or slope. • Operate the machine up and down slopes with the heavy end of the machine uphill. Weight distribution changes with attachments. -
Page 5: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal125-6110 125-6110 1. Crushing hazard—do not stand under any part of the machine. -
Page 6: Product Overview
167 kg (370 lb) TX 525 and TX 427 To ensure optimum performance and continued safety Bucket Capacity Maximum Density certification of the machine, use only genuine Toro Struck (leveled) bucket 2262 kg/m (148 lb/ft replacement parts and accessories. Replacement... -
Page 7: Operation
Operation Material Density Material Density (Approximate) Determine the left and right sides of the machine from Caliche 1250 kg/m (78 lb/ft the normal operating position. Clay: Natural bed 1600 kg/m (104 lb/ft Installing and Removing 1480 kg/m (93 lb/ft the Attachment 1660 kg/m (104 lb/ft With gravel, dry... -
Page 8: Grapple Bucket Operation And Control
Bucket Operation CAUTION Hydraulic couplers, hydraulic lines/valves, With the jaws open, you can use this attachment as a standard bucket. and hydraulic fluid may be hot. If you contact hot components, you may be burned. When loading material, always have the bucket level •... -
Page 9: Filling The Bucket
Filling the Bucket Transport Position Position the bucket level to the ground. When transporting a load, keep the attachment as close to the ground as possible, no more than 15 cm Drive forward and insert the bucket into the pile (6 inches) above the ground. -
Page 10: Maintenance
Maintenance Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Lubricate the bucket. • Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting supports, wear, weather, and chemical deterioration. Before each use or daily • Ensure that all fasteners are securely tightened. •... -
Page 11: Storage
Storage Before long-term storage, wash the attachment with mild detergent and water to remove dirt and grime. Check and tighten all hardware. Repair or replace any part that is damaged or worn. Ensure that all of the hydraulic hose couplers are connected together to prevent contamination of the hydraulic system. - Page 12 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 13 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant regulations.
- Page 14 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.
- Page 15 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.