Table of Contents
Advertisement
• Insert the nuts and washer onto the suspension bolts
for locking the suspension bolts on the ceiling.
• Mount the suspension bolts to the anchor-nuts firmly.
• Secure the Installation plates onto the Suspension
bolts (adjust level roughly.) using nuts, washers and
spring washers.
• Engage 2 hooks on the both left and right side
of the unit to the lower slot of Installation Plates.
• Adjust a level with a level gauge on the direction
of left-right, back-forth by adjusting suspension
bolts.
• Move the hooks on the unit to the upper slot of
Installation Plates. Then the unit will be declined
to the bottomside so as to drain well.
1)
Suspension
bolts
Spring
washer
max.
12mm
Washer
2)
Level gauge
Suspension
–18–
Anchor nut
Ceiling
Nut
Washer
Suspension
bolts
Nut
Lower slot
Adjust a level
bolt
Installation plate
Upper slot
Advertisement
Table of Contents
Troubleshooting
