Table of Contents
Advertisement
Parts Name
②
⑫
Front
⑪
①
Name
Interface connectors
12 Signal input/output
34 Signal input/output
56 Power input (output)
7 Status lamp (red)
8 Status lamp (blue)
9 Status lamp (green)
0 Test button
! Handle
@ Guide pin
⑥
④
③
⑤
Input and output connectors for the signal and AC power.
To input the signal from the LED controller or the previous LED module.
When a signal is input into 1, the signal is output from 2.
When a signal is input into 2, the signal is output from 1.
Not functioning with this product.
When AC power is input into 5, AC power is output from 6.
When AC power is input into 6, AC power is output from 5.
Do not input AC power into both 5 and 6.
Flashes when a signal is being input.
Not functioning with this device.
Lights up when power is being input.
Used to display the test patterns. The displayed pattern changes each
time the test button is pressed.
The signal from the LED controller must be interrupted to display a test
pattern.
Use the handles when carrying and installing the cabinet.
Used to align the cabinets when installing them on top of each other.
Rear
Description
English - 7
⑦
⑩
⑧
⑨
Advertisement
Table of Contents
