Mounting Bracket Installation on Cisco 2691,
Cisco 3631, and Cisco 3725 Routers
Product Numbers: ACS-2RU-RM-19=, ACS-2RU-RM-23=
This document describes the procedure to install 19- and 23-inch mounting brackets on Cisco 2691,
Cisco 3631, and Cisco 3725 routers. Use this document in conjunction with the hardware installation
guide and the regulatory compliance and safety information document for your Cisco router, which you
can access as follows:
Hardware Installation Guide
From Cisco.com at http://www.cisco.com, select Products & Services > Routers > Your router
•
platform > Installation Guides Books > Hardware installation guide for your router
On the Documentation CD-ROM or on the previous Cisco website, navigate to the following URL:
•
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/, then select your router
platform and navigate to the hardware installation guide.
Regulatory Compliance and Safety Information Document
From Cisco.com at http://www.cisco.com, select Products & Services > Routers > Your router
•
platform > Technical details > Regulatory Approvals and Compliance > Cisco 2600 Series, 3600
Series, and 3700 Series Regulatory Compliance and Safety Information
On the Documentation CD-ROM or on the previous Cisco website, navigate to the following URL:
•
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3700/rcsi/modrcsi2.htm
If you have questions or need help, see the
This document includes the following sections:
Safety Recommendations, page 2
•
Bracket Kit Contents, page 3
•
What to Do After Installing the Router, page 7
•
Obtaining Documentation, page 7
•
Obtaining Technical Assistance, page 8
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2002. Cisco Systems, Inc. All rights reserved.
"Obtaining Documentation" section on page
7.