Table of Contents
Advertisement
Function
This is a function to set whether to display the operation mode
Display Opposite
selection impossible status according to the operation of the outdoor
Mode
unit when the cooling/heating mode is selected for products that do
not support simultaneous cooling/heating operation.
Set the password to prevent unauthorized change to remote controller
settings.- If the password is set, when you enter "menu – setting",
Password
you need to input password toenter the setting list.- When you forgot
the password, you can initialize the password using the installer
setting's"password initialization".The initialized password is "0000".
Remote
This function executes the pairing function of theWi-Fi module
Controller Wi-Fi
connected to ThinQ App.
Pairing
Auto return to
This is a function to set whether to automatically return to the main
main screen
screen when there is no touch input for a certain period of time.
Sound
Activate touch button sound effect
Air conditioner / Ventilator setting
Product
Function
Aircon Vent.
Vane Angle
O
You can adjust the angle of the wind.
control
When cleaning the indoor unit filter,
Elevation Grill
O
move the elevation grill up and down.
move the elevation grill up and down.
After using the air conditioner for a
certain period of time, it is the cleaning
function of the kit attached to the
Robot
O
product.
Cleaning
Available after 30 seconds of operation
stop, select whether to operate
automatically as an option.
automatically as an option.
When the product is turned off after
cooling operation, mold or moisture
Auto Dry
O
can be removed by drying the inside of
the room.
You can check the information
Filter Sign
O
O
remaining afterusing the filter and reset
the usage time.
In Auto operation mode, the cooling
Change
and heating operation is automatically
O
O
Temperature
converted and operated according to
the set temperature.
the set temperature.
This function sets the minimum
Dead Band
O
difference between heating and cooling
desired temperature in 2set Auto mode.
desired temperature in 2set Auto mode.
Description
Description
All
All vanes operate the
same at the set angle.
Up / Stop / Down
Automatic : Automatically performs after 30 hours of accumulated indoor unit
operation.
Manual : Performs manually.
ON/OFF
Note that filter use information is a reference item, that the actual filter status
may vary depending on the installation environment and usage conditions.
• If dust gets on the filter, the cooling/heating ability decreases and the
electricity bill is high, so make sure to clean the filter when it is time to clean
it.
SETTINGS
Note & Option
On / Off
-
On / Off
On / Off
Option
Each/Customize
Standard
The angle for each
Vanes are controlled as
vane can be set
standard movements for
individually.
individually.
individually.
each product.
each product.
each product.
21
Hide quick links:
Advertisement
Table of Contents
