Table of Contents
Advertisement
Installation
Installation
Read completely, then follow step by step.
Selection of the best location
• If the temperature might rise above 30 ℃ or the humidity might rise above RH 80 %, attach the Dew-
Protective kit or use another insulation to the indoor body.
h Dew Protective kit is sold separately.
Use glass wool material or polyethylene foam and make sure at least 10 mm thick.
• There should not be any heat source or steam near the unit.
• There should not be any obstacles to the air circulation.
• A place where air circulation in the room will be good.
• A place where drainage can be easily obtained.
• A place where noise prevention is taken into consideration.
• Do not install the unit near the door way.
• Ensure the spaces indicated by arrows from the wall, ceiling, or other obstacles.
• The indoor unit must have the maintenance space.
Ceiling
Ceiling Board
500 or
more
CAUTION
!
In case that the unit is installed near the sea, the installation parts may be corroded by
salt. The installation parts (and the unit) should be taken appropriate anti-corrosion
measures.
h Please use an annexed sheet or the corrugated
cardboard on the bottom of packing as
installation sheet.
Annexed sheet
6
Indoor Unit
Or
Packing corrugated
cardboard on the
bottom
Ceiling Board
500 or
more
Floor
h When using the bottom sheet, please use it
after separating the installation sheet from
packing of the product floor by using a knife etc
as a picture below.
Unit:mm
Hide quick links:
Advertisement
Table of Contents
