LG M2762A Owner's Manual
Monitor tv
Hide thumbs
Also See for M2762A:
- Owner's manual (86 pages) ,
- Owner's manual (82 pages) ,
- Owner's manual (86 pages)
Related Manuals for LG M2762A
Summary of Contents for LG M2762A
- Page 1 OWNER’S MANUAL MONITOR TV Please read this manual carefully before operating your set and retain it for future reference. MONITOR TV MODELS M197WAP M2062A M227WAP M2762A M237WAP www.lg.com...
-
Page 2: Table Of Contents
ASSIGNING A STATION NAME .......40 SECURING THE SET TO THE WALL TO PROGRAMME EDIT .........41 PREVENT FALLING WHEN THE SET IS USED ON A STAND (Only M2762A) ......20 FAVOURITE PROGRAMME ......42 ATTACHING THE TV TO A DESK SELECTING THE PROGRAMME LIST ....43 (Only M2762A) ..........21... - Page 3 STEREO / DUAL RECEPTION ....59 M227WAP ...........78 NICAM RECEPTION ........60 M237WAP ...........79 SPEAKER SOUND OUTPUT SELECTION ...60 M2062A ............80 M2762A ............81 TIME SETTING CLOCK SETUP ..........61 AUTO ON/OFF TIMER SETTING ....62 SLEEP TIMER SETTING ........63 AUTO SLEEP ............64 OPTION SETTING ON-SCREEN MENU LANGUAGE SELECTION ..65...
-
Page 4: Preparation
PREPARATION <M197WAP/M227WAP/M237WAP> SIDE PANEL CONTROLS ■ This is a simplified representation of the side panel. The image shown may be somewhat different from your set. INPUT Button MENU Button OK Button VOLUME Buttons PROGRAMME Buttons Power Button Headphone Jack... -
Page 5: Front Panel Controls
<M2062A/M2762A> FRONT PANEL CONTROLS ■ This is a simplified representation of the front panel. The image shown may be somewhat different from your set. Headphone Power Indicator IR receiver Jack illuminates blue when the set (Remote controllr receiver) is switched on. -
Page 6: Back Panel Information
PREPARATION <M197WAP/M227WAP/M237WAP> BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. The image shown may be somewhat different from your set. <M197WAP/M227WAP> <M237WAP> AV IN AUDIO IN AV IN (RGB) VIDEO AUDIO HDMI IN (MONO) AUDIO IN (RGB) VIDEO AUDIO... -
Page 7: M2062A/M2762A
<M2062A/M2762A> BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. The image shown may be somewhat different from your set. AC IN AV IN AUDIO IN (RGB) VIDEO AUDIO (MONO) HDMI IN ANTENNA/ CABLE IN AC IN... -
Page 8: Stand Installation
PREPARATION <M197WAP/M227WAP> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Insert the Stand Base into the product. Stand Base Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten. -
Page 9: M237Wap
<M237WAP> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Insert the Stand Base into the product. Stand Base Use a Coin on the bottom of the stand base and turn the screw clockwise to tighten. -
Page 10: M2062A
PREPARATION <M2062A> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Insert the Stand Base into the product. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Stand Base Turn the Stand Base Lock through 90°... -
Page 11: M2762A
<M2762A> STAND INSTALLATION ■ The image shown may be somewhat different from your set. Carefully place the product screen side down on a cush- ioned surface that will protect product and screen from damage. Insert the Stand Base into the product. -
Page 12: Detaching Stand
PREPARATION <M197WAP/M227WAP> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin. -
Page 13: M237Wap
<M237WAP> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left. Turn the screw by using a Coin. -
Page 14: M2062A
PREPARATION <M2062A> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a Detach the monitor to the Stand Base by turn- cushion or soft cloth. ing the screw to the left. Stand Base Turn the stand base lock through 90°... -
Page 15: M2762A
<M2762A> DETACHING STAND ■ The image shown may be somewhat different from your set. Place the set screen side down on a cushion or soft cloth. Detach the monitor to the Stand Base by turning the screw to the left. -
Page 16: Detaching Stand Body (M2062A/M2762A)
PREPARATION DETACHING STAND BODY (M2062A/M2762A) ■ The image shown may be somewhat different from your set. ■ Remove the Stand Body in the same way as the following when using it as a Wall Hook. <M2062A> 1. Remove the screw 2 point. -
Page 17: Wall Mount: Horizontal Installation
M197WAP: 100 mm x 100 mm hole spacing Wall Mount Pad M227WAP: 100 mm x 100 mm hole spacing M237WAP: 75 mm x 75 mm hole spacing M2062A: 100 mm x 100 mm hole spacing M2762A: 200 mm x 100 mm hole spacing... -
Page 18: Desktop Pedestal Installation
10 cm POSITIONING YOUR DISPLAY ■ The image shown may be somewhat different from your set. Adjust the position of the panel in various ways for maximum comfort. * Tilt range * Tilt range <M197WAP/M227WAP/M237WAP> <M2062A/M2762A> -5° 15° -5° 15°... -
Page 19: Location
LOCATION Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in a position to allow a free flow of air. -
Page 20: Securing The Set To The Wall To Prevent Falling When The Set Is Used On A Stand (Only M2762A)
PREPARATION SECURING THE SET TO THE WALL TO PREVENT FALLING WHEN THE SET IS USED ON A STAND (Only M2762A) ■ Image shown may differ from your set. We recommend that you set up the set close to a wall so it cannot fall over if pushed backwards. -
Page 21: Attaching The Tv To A Desk (Only M2762A)
ATTACHING THE TV TO A DESK (Only M2762A) ■ Image shown may differ from your set. The TV must be attached to desk so it cannot be pulled in a forward/backward direction,potentially caus- ing injury or damaging the product.Use only an attached screw. -
Page 22: Kensington Security System
However, they have no adverse effect on the monitor’s performance. c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. <M237WAP> <M197WAP/ M227WAP > <M2062A/M2762A>... -
Page 23: Antenna Connection
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. <M197WAP/ M227WAP > <M237WAP> <M2062A/M2762A> AC IN AV IN AUDIO IN (RGB) VIDEO... -
Page 24: External Equipment Setup
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ The image shown may be somewhat different from your set. HD RECEIVER SETUP When connecting with a component cable Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on AV IN... -
Page 25: Connecting A Set-Top Box With A Hdmi Cable
Connecting a set-top box with a HDMI cable Connect the HDMI output of the digital set-top box to AV IN the HDMI IN jack on the SET. AUDIO IN (RGB) VIDEO AUDIO (MONO) HDMI IN Select HDMI input source using the INPUT button on ANTENNA/ the remote control. -
Page 26: Dvd Setup
EXTERNAL EQUIPMENT SETUP DVD SETUP Connecting with a component cable Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the SET. AV IN AUDIO IN (RGB) VIDEO AUDIO (MONO) HDMI IN Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the SET. -
Page 27: Connecting With A Hdmi Cable
Connecting with a HDMI cable Connect the HDMI output of the DVD to the HDMI IN jack on the SET. AV IN AUDIO IN (RGB) VIDEO AUDIO (MONO) HDMI IN Select HDMI input source using the INPUT button on the remote control. ANTENNA/ CABLE IN VIDEO... -
Page 28: Vcr Setup
EXTERNAL EQUIPMENT SETUP VCR SETUP ■ To avoid picture noise (interference), allow adequate distance between the VCR and SET. Connecting with a RF cable Connect the ANT OUT socket of the VCR AV IN AUDIO IN to the ANTENNA IN socket on the SET. (RGB) VIDEO AUDIO... -
Page 29: Other A/V Source Setup
OTHER A/V SOURCE SETUP Connect the AUDIO / VIDEO jacks between AV IN SET and external equipment. Match the jack AUDIO IN (RGB) VIDEO AUDIO (MONO) HDMI IN colours. (Video = yellow, Audio Left = white, and ANTENNA/ CABLE IN Audio Right = red) AUDIO VIDEO... -
Page 30: Pc Setup
EXTERNAL EQUIPMENT SETUP PC SETUP When using the remote control, aim it at the remote control sensor on the SET. When connecting with a D-sub 15 pin cable Connect the signal cable from the monitor output socket AV IN AUDIO IN of the PERSONAL COMPUTER to the PC input socket VIDEO (MONO) -
Page 31: Back Cover For Wire Arrangement
BACK COVER FOR WIRE ARRANGEMENT Tie cables together with a cable management as shown in the illustration. <M197WAP/ M227WAP > <M237WAP> <M2062A/M2762A>... -
Page 32: Supported Dispaly Resolution
EXTERNAL EQUIPMENT SETUP SUPPORTED DISPALY RESOLUTION RGB[PC] mode M197WAP M227WAP / M237WAP / M2762A Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(kHz) Frequency(Hz) Frequency(kHz) Frequency(Hz) 640 x 480 31.469 59.94 640 x 480 31.469 59.94 800 x 600 37.879 60.317 800 x 600 37.879... -
Page 33: Watching Tv / Programme Control
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the SET. A TYPE Switches the set on from standby or off to POWER POWER INPUT TV/PC standby. MUTE I/II Selects TV or PC mode. -
Page 34: Remote Control Key Functions
LIST Q.VIEW WATCHING TV / PROGRAMME CONTROL POWER INPUT TV/PC REMOTE CONTROL KEY FUNCTIONS MUTE I/II A TYPE MENU Selects a menu.( p.36 ) ► TEXT MENU SLEEP ARC/ SLEEP Sets the sleep timer. ARC/ * Selects your desired picture format.( p.44 ) ►... -
Page 35: Turning On The Set
TURNING ON THE SET When using the remote control, aim it at the remote control sensor on the SET. Firstly, connect the power cord correctly. At this stage, the SET switches to standby mode. ■ In standby mode to turn SET on, press the button on the SET or press the POWER buttons on the remote control and the SET will switch on. -
Page 36: On Screen Menus Selection And Adjustment
WATCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Press the MENU button and then ▲/▼ button to display each menu. Press the ► button and then ▲/▼ button to select a menu item. Change the setting of an item in the sub or pull-down menu with ◄... -
Page 37: Auto Programme Tuning
AUTO PROGRAMME TUNING Up to 200 TV stations can be stored by programme numbers (0 to 199). Once you have preset the stations, you will be able to use the ▲ / ▼ or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. -
Page 38: Manual Programme Tuning
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING Manual Turning lets you manually tune and arrange the stations in whatever order you desire. Press the MENU button and then ▲ / ▼ button to select the Setup menu. Press the ► button and then ▲ / ▼ button to select Manual Tuning. -
Page 39: Fine Tuning
FINE TUNING Normally fine tuning is only necessary if reception is poor. Setup Auto Tuning Press the MENU button and then ▲ / ▼ button to select Manual Tuning the Setup menu. Programme Edit Favourite Programme Press the ► button and then ▲ / ▼ button to select Manual Tuning. -
Page 40: Assigning A Station Name
WATCHING TV / PROGRAMME CONTROL ASSIGNING A STATION NAME You can assign a station name up to five characters to each programme number. Setup Auto Tuning Press the MENU button and then ▲ / ▼ button to Manual Tuning select the Setup menu. Programme Edit Favourite Programme Press the ►... -
Page 41: Programme Edit
PROGRAMME EDIT This function enables you to delete or skip stored programmes. Also you can move some stations to other programme numbers. Press the MENU button and then ▲ / ▼ button to select the Setup menu. Press the ► button and then ▲ / ▼ button to select Programme Edit. -
Page 42: Favourite Programme
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Repeatedly press the YELLOW button to select stored favourite programmes. Press the MENU button and then ▲ / ▼ button to select the Setup menu. Press the ►... -
Page 43: Selecting The Programme List
SELECTING THE PROGRAMME LIST You can check which programmes are stored in the memory by displaying the programme list. ■ Displaying programme l ist Press the LIST button to display the Programme Li s t menu. The programme list appears on the screen. One programme list contains ten programmes as shown. -
Page 44: Picture Control
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Original, 4:3, 14:9, Zoom1, Zoom2 and Just Scan. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. -
Page 45: Preset Picture Settings
PRESET PICTURE SETTINGS Picture Mode-Preset Picture Mode adjusts the SET for the best picture appearance. Select the preset value in the Picture Mode menu based on the programmecategory. Vivid, Standard, Cinema and sRGB are programmed for optimum picture reproduction at the factory. Picture Press the MENU button and then ▲... -
Page 46: Manual Picture Adjustment
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User Option Backlight To control the brightness of the screen, adjust the brightness of LCD panel. Contrast Adjusts the difference between light and dark levels in the picture. Brightness Increases or decreases the amount of white in the picture. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. -
Page 47: Picture Improvement Technology
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video value differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Picture Reset”... - Page 48 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY ■ Adjusts the contrast to keep it at the best level according to the brightness Dynamic Contrast of the screen. The picture is improved by making bright parts brighter and dark parts darker. (Off/Low/High) ■ This feather is not working in RGB 1080p/i mode. ■...
-
Page 49: Picture Reset
PICTURE RESET Settings of the selected picture modes return to the default factory settings. Picture ▲ Press the MENU button and then ▲/▼ button to select • Backlight • Contrast the Picture menu. • Brightness • Sharpness • Colour • Tint Press the ►... -
Page 50: Screen Setup
PICTURE CONTROL SCREEN SETUP AUTO CONFIGURE (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. -
Page 51: Manual Configure
MANUAL CONFIGURE(Adjustment for screen Position) If the picture is not clear and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode when the signal exist : RGB PC Picture Press the MENU button and then use ▲/▼ button to Aspect Ratio Picture Mode select the Picture menu. -
Page 52: (Reset To Original Factory Settings)
PICTURE CONTROL INITIALIZING (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value This function works in the following mode when the signal exist : RGB PC Picture Press the MENU button and then use ▲/▼ button to Aspect Ratio Picture Mode select the Picture menu. -
Page 53: Selecting Resolution
SELECTING RESOLUTION To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. Picture Press the MENU button and then use ▲/▼ button to Aspect Ratio Picture Mode select the Picture menu. -
Page 54: Sound Control
SOUND CONTROL PRESET SOUND SETTINGS - SOUND MODE You can select your preferred sound setting; Standard, Music or Cinema. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. Standard, Music and Cinema are preset for optimum sound quality at the factory. -
Page 55: Sound Setting Adjustment - User Mode
SOUND SETTING ADJUSTMENT - USER MODE Press the MENU button and then ▲/▼ button to select the Audio menu. Audio Sound Mode • Treble Press the ► button and then ▲/▼ button to select • Bass • Reset Sound Mode. Auto Volume Balance Press the ►... -
Page 56: Auto Volume Leveler
SOUND CONTROL AUTO VOLUME LEVELER Auto Volume automatically remains on the same level of volume if you change programmes. Audio Sound Mode Press the MENU button and then ▲/▼ button to select • Treble • Bass the Audio menu. • Reset Auto Volume Balance Press the ►... -
Page 57: Balance
BALANCE You can adjust the sound balance of the speakers to the preferred levels. Audio Sound Mode Press the MENU button and then ▲/▼ button to select • Treble • Bass the Audio menu. • Reset Auto Volume Balance Press the ► button and then ▲/▼ button to select Auto Balance. -
Page 58: Audio Reset
SOUND CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. Audio Sound Mode Press the MENU button and then ▲/▼ button to select • Treble • Bass the Audio menu. • Reset Auto Volume Balance Press the ►... -
Page 59: I/Ii
I/II STEREO / DUAL RECEPTION When a programme is selected, the sound information for the station appears with the programme number and station name. Press the I/II button to select the Multi Audio menu. Broadcast On Screen Display Mono MONO Stereo STEREO Dual... -
Page 60: Nicam Reception
SOUND CONTROL NICAM RECEPTION If the SET is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. When NICAM MONO is received, you can select NICAM MONO or MONO. -
Page 61: Time Setting
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off time function. If current time setting is erased by a power failure or the SET is unplugged, reset the clock. Time Clock Press the MENU button and then ▲/▼ button to select Off Time On Time the Time menu. -
Page 62: Auto On/Off Timer Setting
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the SET to standby at a preset time. The SET is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed for Two hours after. -
Page 63: Sleep Timer Setting
SLEEP TIMER SETTING You do not have to remember to switch the SET off before you go to sleep. The sleep timer automatically switches the SET to standby after the preset time has elapsed. Time Clock Press the MENU button and then ▲ / ▼ but ton to select Off Time On Time the Time menu. -
Page 64: Auto Sleep
TIME SETTING AUTO SLEEP If the set is switched on and there is no input signal, it will switch off automatically after 15 minutes. Time Clock Press the MENU button and then ▲ / ▼ but ton to Off Time On Time select the Time menu. -
Page 65: Option Setting
OPTION SETTING ON-SCREEN MENU LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Option Press the MENU button and then use ▲ / ▼ button Language Key Lock DDC-CI to select the Opt ion menu. Power Indicator Mode Setting Factory Reset... -
Page 66: Key Lock
OPTION SETTING KEY LOCK The SET can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This SET is programmed to remember which option it was last set to even if you turn the SET off. Option Press the MENU button and then ▲... -
Page 67: Ddc-Ci(Only Rgb)
DDC-CI(Only RGB) DDC-CI (Display Data Channel Command Interface) is a communication protocol for communications between PC and set. DDC-CI makes it possible to adjust and setup detailed functions on PC instead of the set OSD. Set can be adjusted with PC by connecting communication between PC and set when DDC-CI is ON, and when DDC-CI is OFF set cannot be adjusted with PC because communication between PC and set is discon- nected. -
Page 68: Power Indicator
OPTION SETTING POWER INDICATOR It is function to control of LED(turn on/off). Option Language Press the MENU button and then ▲/▼ button to select Key Lock the Option menu. DDC-CI Power Indicator Mode Setting Factory Reset Press the ► button and then ▲/▼ button to select Power Indicator. -
Page 69: Mode Setting
MODE SETTING We recommend setting the set to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is an optimal setting for displaying at stores. Option Press the MENU button and then ▲ / ▼ button to select Language the Option menu. -
Page 70: Factory Reset
OPTION SETTING FACTORY RESET Use to quickly reset all the menu options to their original factory preset values. This function deletes all SET programmes. When the Factory Reset is completed, you must restart the Installation Guide. Option Press the MENU button and then ▲ / ▼ button to select Language the Option menu. -
Page 71: Teletext
TELETEXT This feature is not avai lable in al l countries. Teletext is a free service broadcast by most SET stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. POWER TV/PC INPUT MUTE I/II The teletext decoder of this SET can support the SIMPLE, TOP and FASTEXT systems. -
Page 72: Switch On/Off
TELETEXT SWITCH ON/OFF The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block. -
Page 73: Special Teletext Functions
SPECIAL TELETEXT FUNCTIONS ꕎ TIME When viewing a SET programme, press this button to display the time at the topright hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. -
Page 74: Appendix
APPENDIX TROUBLESHOOTING The SET does not operate properly ■ Check to see if there is any object between the SET and the remote The remote control control causing an obstruction. does not work ■ Are batteries installed with correct polarity (+ to +, - to -)? ■... - Page 75 TROUBLESHOOTING The Audio function is not working ■ Press the VOL ◄ or ► (or - +) button. Picture OK & ■ Sound muted? Press MUTE button. No sound ■ Try another channel. The problem may be with the broadcast. ■...
-
Page 76: Maintenance
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new SET. Caution : Be sure to swith the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. -
Page 77: Product Specifications
PRODUCT SPECIFICATIONS M197WAP 470.1 mm Wide (18.51 inch) TFT (Thin Film Transistor) Screen Type LCD (Liquid Crystal Display) Panel LCD Panel Visible diagonal size: 470.1 mm Pixel Pitch 0.30 mm (H) x 0.30 mm (V) Max. Resolution 1360 x 768 @ 60 Hz Recommended Resolution 1360 x 768 @ 60 Hz Video Signal... -
Page 78: M227Wap
APPENDIX PRODUCT SPECIFICATIONS M227WAP 546.86 mm Wide (21.53 inch) TFT (Thin Film Transistor) Screen Type LCD (Liquid Crystal Display) Panel LCD Panel Visible diagonal size: 546.86 mm Pixel Pitch 0.248 mm (H) x 0.248 mm (V) Max. Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Video Signal... -
Page 79: M237Wap
PRODUCT SPECIFICATIONS M237WAP 584.2 mm Wide (23 inch) TFT (Thin Film Transistor) Screen Type LCD (Liquid Crystal Display) Panel LCD Panel Visible diagonal size: 584.2 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max. Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Video Signal... -
Page 80: M2062A
APPENDIX PRODUCT SPECIFICATIONS M2062A 508.05 mm Wide (20 inch) TFT (Thin Film Transistor) Screen Type LCD (Liquid Crystal Display) Panel LCD Panel Visible diagonal size: 508.05 mm Pixel Pitch 0.2766 mm (H) x 0.2766 mm (V) Max. Resolution 1600 x 900 @ 60 Hz Recommended Resolution 1600 x 900 @ 60 Hz Video Signal... -
Page 81: M2762A
PRODUCT SPECIFICATIONS M2762A 686 mm Wide (27 inch) TFT (Thin Film Transistor) Screen Type LCD (Liquid Crystal Display) Panel LCD Panel Visible diagonal size: 686 mm Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) Max. Resolution 1920 x 1080 @ 60 Hz... - Page 82 Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.