Connecting To An Antenna Or Cable; Connections (Notifications); Other Connections - LG 55UF680T Owner's Manual
Hide thumbs
Also See for 55UF680T:
- Owner's manual (65 pages) ,
- Manual (40 pages) ,
- Owner's manual (41 pages)
Table of Contents
Advertisement
Available languages
Available languages
• When using the wall mounting bracket, apply
the adhesive protective label to cover the
unused stand openings. This will prevent the
accumulation of dust and dirt. (Use only when
provided with your particular model.)
Provided Item
Adhesive protective label
• Depending upon the shape of the stand, use a
flat tool to remove the stand cover as illustrated
below. (e.g., a flat screwdriver)
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
For more information on an external device's
connection, refer to the manual provided with
each device.
NOTE
• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input cable
to the TV through a DVD recorder or VCR. For more
information about recording, refer to the manual
provided with the connected device.
• The external device connections shown may differ
slightly from illustrations in a manual.
• Connect external devices to the TV regardless about the
order of the TV port.
• If you connect a gaming device to the TV, use the cable
supplied with the gaming device.
• Refer to the external equipment's manual for operating
instructions.
• In PC mode, there may be noise associated with the
resolution, vertical pattern, contrast, or brightness.
If noise is present, change the PC output to another
resolution, change the refresh rate to another rate, or
adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
• Depending upon the graphics card, some resolution
settings may not allow the image to be positioned on
the screen properly.
10
• Some USB Hubs may not work. If a USB device
connected through a USB Hub is not detected, connect
it directly to the USB port on the TV.
Connecting to an Antenna or
Cable
Connect an antenna, cable, or cable box to watch
TV. The RF cable may not be supplied, depending
upon the model.
CAUTION
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
NOTE
• To improve the picture quality in a poor signal
area, purchase a signal amplifier.
• Use a signal splitter to use 2 TVs or more.
• If the antenna is not installed properly, contact
your dealer for assistance.
• DTV Audio Supported Codec: MPEG, AAC,
HE-AAC, Dolby Digital.
• Direct ULTRA HD broadcast is unavailable in
areas without an ULTRA HD signal.
• This TV cannot receive ULTRA HD (3840 x 2160
pixels) broadcasts directly because the related
standards have not been confirmed.
(Depending upon model)
Other Connections
Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.
NOTE
PICTURE
•
j
j
j
HDMI ULTRA HD Deep Color:
- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off: Support 4K @ 50/60 Hz (4:2:0)
• If the device connected to Input Port also
supports ULTRA HD Deep Color, your picture
may be clearer. However, if the device doesn't
support it, it may not work properly. In that case,
connect the device to a different HDMI port or
change the TV's HDMI ULTRA HD Deep Color
setting to Off.
- This feature is available only on certain models
which support HDMI ULTRA HD Deep Color.
j
Advertisement
Table of Contents
