Table of Contents
Advertisement
Installation of Indoor, Outdoor Unit
Installation of Indoor, Outdoor Unit
Read completely, then follow step by step.
Select the best location
Select the best location
Indoor unit
1. Do not allow any heat or steam to be near
the unit.
2. Select a place where there are no obstacles
in front of the unit.
3. Make sure that condensation drainage can
be conveniently routed outdoors.
4. Install as far away from a doorway as
possible for better performance.
5. Ensure the unit is unobstructed, allow proper
space on all sides according to the arrows
and distance measurements in the figure at
right.
6. Use a stud finder to locate studs to prevent
unnecessary damage to the wall.
Outdoor unit
1. If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the heat pump is not
restricted.
2. Ensure the unit is unobstructed, allow proper
space on all sides according to the arrows
and distance measurements in the figure at
right.
3. Do not allow animals or plants to remain the
in path of the discharging warm air.
4. Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
5. Select a place so that the warm air and sound
from the air conditioner does not disturb
neighbors.
Rooftop Installations:
If the outdoor unit is installed on a rooftop, be
sure to level the unit. Ensure the rooftop and
anchoring method are adequate for the unit
location. Consult local codes regarding rooftop
mounting.
6 Multi Air Conditioner
More than
100mm
More than
100mm
More than
300mm
More than
700mm
h The figure may be slightly different according
to the model.
More than 200mm
More than
100mm
More than 200mm
More than
100mm
More than
300mm
More than
600mm
Advertisement
Table of Contents
