Connections (Notifications); Connecting To An Antenna Or Cable - LG 55SJ9500 Owner's Manual
Hide thumbs
Also See for 55SJ9500:
- Owner's manual (78 pages) ,
- Owner's manual (64 pages) ,
- Owner's manual (66 pages)
Table of Contents
Advertisement
Available languages
Available languages
65SJ8000
Model
65SJ800T
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW350B
(optional)
A
B
• Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
• Do not use a sharp object when you
detached the cable cover. This could
damage the cable or the cabinet. It may
also cause personal harm.
(For 55/65SJ9500, 65SJ950T)
8
Connections (Notifications)
75SJ955T
86SJ9570
86SJ957T
You can connect various external devices to the TV.
600 x400
Supported external devices are: HD receivers, DVD
M8
players, VCRs, audio systems, USB storage devices,
4
PC, gaming devices, and other external devices. For
more information on external device's connection,
LSW640B
refer to the manual provided with each device.
• If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information about recording, refer to
the manual provided with the connected device.
• The external device connections shown may
differ slightly from illustrations in a manual.
• Connect external devices to the TV regardless
about the order of the TV port.
• If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
• Refer to the external equipment's manual for
operating instructions.
• In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the Picture menu until the picture is
clear. Depending upon the graphics card, some
resolution settings may not allow the image to
be positioned on the screen properly.
• Some USB Hubs may not work. If a USB device
connected through a USB Hub is not detected,
connect it directly to the USB port on the TV.
• When connecting via a wired LAN, it is
recommended to use a CAT 7 cable.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
• Complete all connections between devices, and
then connect the power cord to the power outlet
to prevent damage to your TV.
Advertisement
Table of Contents
