Table of Contents
Advertisement
Precautions when laying power wiring
Use round pressure terminals for connections to the power terminal block.
When none are available, follow the instructions below.
- Do not connect wiring of different thicknesses to the power terminal block. (Slack in the power
wiring may cause abnormal heat.)
- When connecting wiring which is the same thickness, do as shown in the figure below.
Connect same thickness
wiring to both sides.
- For wiring, use the designated power wire and connect firmly, then secure to prevent outside
pressure being exerted on the terminal block.
- Use an appropriate screwdriver for tightening the terminal screws. A screwdriver with a small
head will strip the head and make proper tightening impossible.
- Over-tightening the terminal screws may break them.
Round pressure terminal
It is forbidden to connect
two to one side.
WIRING CONNECTION
Power wire
It is forbidden to
connect wiring of
different thicknesses.
11
Advertisement
Table of Contents
