Table of contents Safety Information.....................3 How to Use.........................4 Assembling cleaner .......................4 Using the cleaning head and Accessory Nozzles..............6 Emptying the Dust Chamber ....................8 Operating the cleaner......................9 Cleaning the Filter ........................10 Cleaning the Exhaust Filter ....................11 Troubleshooting........................12...
If blockage or obstruction is located, remove and wait at least 30 minutes before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and turn on the switch. If the cleaner still does not run, please contact your approved LG service centre.
How to Use Assembling Cleaner Fit the large cleaning head into the end of the tube. NT** NE** Spring latch Telescopic HT** tube HE** The 2 position head Telescopic tube (depending on model) (depending on model) Push telescopic tube into •...
Page 6
Head Flexible Hose NT** NE** HT** HE** Attachment Point Button Connecting the flexible hose • Push the end of the head on the flexible hose CAUTION into the attachment point on the vacuum cleaner. • To remove the flexible hose from the vacuum •...
Page 8
Depending on model Pedal When performing The 2 position head usual cleaning. (Depending on model) (Depending on mo del) • The 2 position cleaning head • You can perform cleaning at equipped with a pedal which allows any place such as corner or you to alter its position according to narrow crack by utilizing the the type of floor to be cleaned.
Troubleshooting What to Do When Suction Performance Decreases • Turn off the vacuum cleaner and unplug it. • Check the telecsopic tube, flexible hose and cleaning tool for blockages or obstructions. • Check that the dust chamber is not full. Empty if necessary. •...