Table of Contents
Advertisement
One-Way Decorative Cover Installation
•
•
1. Open the air outlet vane, and remove the side covers.
2. Remove the air inlet panel from the decoration cover.
3. Hook the decoration cover to indoor unit, using the hooks attached at the back of the decoration cover (hook on both sides).
4. Position the wires / cables so they do not get pinched between the decoration cover and indoor unit.
5. Install the six (6) or seven (7) screws (number of screws depends on the model).
6. Attach the vane motor connector, display connector, and air inlet.
7. Install the air inlet panel (including the air filter) and side covers.
Figure 33: One-Way Cassette Decorative Cover Installation.
Decorative Cover
Air Outlet Vane
Decorative Cover
Air Outlet Vane
Figure 34: Properly Installing Decorative Cover Against the One-Way Cassette Indoor Unit Frame.
Correct Installation
Cassette
Air
Frame
Ceiling
Board
Decorative Cover
Decorative Cover against
Cassette Frame with No Gap
INSTALL DECORATIVE COVER
Mesh
Control Box Cover
Side Cover
Decorative Cover Installation
Screws (M6 Hexagon; Tighten
13/16 in.)
Air Inlet Panel
Side Cover
Decorative Cover Installation
Screws (M6 Hexagon; Tighten
13/16 in.)
Air Inlet Grille
Incorrect Installation
Cassette
Frame
Fra
Air
Cool Air Leaking
ool Air L
through Gap
ugh G
Ce
Ceiling
B
Board
Decorative Cover
corati
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
41
Hide quick links:
Advertisement
Table of Contents
