Related Manuals for Honeywell H52WCSC
Summary of Contents for Honeywell H52WCSC
- Page 1 52 Bottle Wine Cooler User Manual Read and save these instructions before use Models: H52WCSC...
-
Page 2: Table Of Contents
CONTENTS 1 Safety Warnings 1.1 Warning ..............1-2 1.2 Electricity related warnings . -
Page 3: Safety Warnings
1 SAFETY WARNINGS 1.1 Warning WARNING: risk of fire / flammable materials This appliance is intended to be used in household, non-retail applications. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 4 Refrigerant and cyclopentane foaming material used for the appliance are flammable. To prevent damage to the environment or any other harm, when the appliance is scrapped, it shall be kept away from any fire source and be recovered by a recovering company with corresponding qualification. For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities if they have been given supervision or instruction concerning use of the appliance in a safe way...
-
Page 5: Electricity Related Warnings
1.3 Electricity Related Warnings • Do not pull the power cord when pulling the power plug of the beverage cooler. Please firmly grasp the plug and pull it out from the socket directly. • Do not damage the power cord under any condition, do not use when the power cord is damaged or the plug is worn. -
Page 6: Related Warnings For Use
1.4 Related Warnings for Use • Do not arbitrarily disassemble or reconstruct the beverage cooler, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist. • Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger. -
Page 7: Warnings For Energy
1.6 Warnings for Energy 01 Beverage cooler might not operate consistently when sited for an extended period of time below the cold end of the range of temperatures for which the cooler appliance is designed. 02 The need to not exceed the storage time(s) recommended by the beverage manufacturers for any kind of beverage. -
Page 8: Proper Use Of Beverage Cooler
2 PROPER USE OF BEVERAGE COOLER 2.1 Names of Components Temperature Control Three Pane Glass Door Shelf 2.2 Display Control Display area Temperature-rise key Standby button Temperature-drop key 64.4 Lighting key °C/°F conversion button When powering on the cooler for the first time, the display screen will display in full for 3 seconds and the start-up tone will ring, and then the display will enter a normal running state. - Page 9 Standby Function Press the standby button for 5s to enter/exit the standby mode. The standby mode will be valid after locking. Lighting Press the lighting button to turn on or off the light and the buzzer will sound once. The light is on when the door is opened and off when the door is closed. Press this button to turn off or on the light when the door is open.
- Page 10 Memory Function The beverage cooler has a power-off memory function. If the power supply is reconnected, the beverage cooler will run under the temperature set before it powered off. Error Code If the following error codes appear on the LED display, please unplug the unit for 24 hours to allow the sensors to completely defrost a restart.
-
Page 11: Placement
2.3 Placement • Before using the cooler, remove all packaging materials including bottom cushions, foam pads and tape inside, tear off the protective film on the door and the upright cooler body. • The cooler should be placed in a well-ventilated indoor place on ground that is flat and sturdy. -
Page 12: Handle Installation
2.5 Handle Installation 01 Put the handle on the glass door through the two bolts. 02 Use the allen wrench to fix the handle, making sure the screw hole is downward. -
Page 13: Reversing The Door Swing
2.6 Reversing the Door Swing 01 Remove the right upper hinge shaft and door. Hinge Shaft 02 Remove 3 screws from the upper hinge on the right side then remove the upper hinge. Remove 3 plastic caps on the left side. From the air cover, remove screws and the sleeve. - Page 14 03 Take out the left upper hinge, and secure it on the left upper corner with a screw. Install the hole caps onto the right upper corner. Remove the lower hinge shaft and install it into the hole on the left side. Then secure the lower hinge onto the left lower corner with a screw.
- Page 15 05 Install the door, and fix the upper hinge shaft.
- Page 16 2.7 Reversing the Door Swing — Longitudinal Handle 01 Remove the shaft hole cap and the sleeve of the upper part of the glass door assembly. Remove the screws, the door light switch block, the door stopper and screws, and the sleeve of the lower part of the assembly. Door Stopper Light...
-
Page 17: The Arrangement Of Bottle
03 Assemble the sleeves, the shaft hole cap, the stopper and the switch block. 04 Install the door on the cabinet. 2.7 The Arrangement of Bottle • Do not let the bottles touch the back side of the cooler in order to maintain proper air circulation within the cooler. -
Page 18: Maintenance Of Beverage Cooler
3 MAINTENANCE OF BEVERAGE COOLER 3.1 Disconnect the cooler Unplug the power plug to disconnect the cooler. 3.2 Stop using the cooler • If the cooler is left unused for a long time please: • Unplug the cooler. • Clean the cooler. •... -
Page 19: Troubleshooting
4 TROUBLESHOOTING Ensure the cooler is plugged in and connected to power Inoperation Check that the voltage is not low Check whether there is a power failure or partial circuits have tripped. Do not overload the coolers Do not open the doors too frequently Long-term operation Note that it is normal that the cooler operates of compressor... - Page 20 If your product needs repair, please contact us via email or phone. ©2021 BHRS Group, LLC. All Rights Reserved. BHRS Group, LLC The Honeywell Trademark is used under license from 585 Prospect St. Honeywell International Inc. Honeywell International Lakewood, NJ 08701 Inc.