Figure 1: Access Panel Locations.
Vertical Type Installation
Step 1:
Remove the existing panels, as shown in
Figure 2.
Step 2:
Insert the adaptor over the return air opening.
Secure the adaptor to the unit floor using the
provided pilot holes, located on the bottom side
flange of the adaptor. See Figure 3.
Figure 2: Remove Panels (Step 1).
Figure 3: Insert the adaptor (Step 2).
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
INSTALLATION
Vertical Type Installation
9