Table of Contents
Advertisement
3. Activate the external speakers
• To enable the speakers, push the "Internal/External speaker switch" below the
speaker terminals.
4. Tnable the touch function (external PC)
• hen used with an OPS slot-in PC, no external USB cable is needed to activate the
touch function.
OOTE:
If connecting to an external PC, use the 3m USB cable supplied with the monitor. Connect the USB
Type-B input marked with "Touch" to a USB Type-A input in the external PC.
5. Connect the Huddly camera
• Connect the camera's USB cable to the USB input on the OPS slot-in PC.
OOTE:
If connecting to an external PC, NEC can provide the Huddly certified USB extension cable to
connect the huddly camera to the external PC.
6. Tnable power to the OPS (skip this step if using an external PC)
If you are using the OPS slot-in PC, the function for the monitor to supply power to the OPS needs to be
enabled.
• Press the MTU button on the IR remote control to open the OSD.
• Navigate to the [OPTION] menu and under [OPTION POER] select [AUTO].
English−14
Advertisement
Table of Contents
