Download Print this page
Epson PowerLite 745c Quick Setup
Epson PowerLite 745c Quick Setup

Epson PowerLite 745c Quick Setup

Epson powerlite 745c: quick start
Hide thumbs Also See for PowerLite 745c:

Advertisement

1
Turn On Your Equipment
1
Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Remove the lens cover.
3
Remove the battery cover on the remote control. Locate the batteries
that came with the projector and insert them as shown. Then replace
the battery cover.
4
To turn the projector on, press the red
projector or the remote control. The projector beeps once, and the
projector's Power light flashes green and then stays on.
CAUTION: Before unplugging the projector...
Shut the projector down properly:
1. Press the
Power light flashes orange (about 30 seconds).
2. Once the light stops flashing and the projector beeps, it's safe to
unplug the projector.
2

Adjust the Image

1
To raise the image, press the blue foot release button for the front
adjustable foot and lift the front. Release the button to lock the
foot in position.
EPSON
Power button twice. Let the projector cool while the
®
PowerLite

Quick Setup

Power button on the
®
745c

Advertisement

loading

Summary of Contents for Epson PowerLite 745c

  • Page 1: Quick Setup

    Turn On Your Equipment Connect the power cord to the back of the projector and plug the other end into an electrical outlet. Remove the lens cover. Remove the battery cover on the remote control. Locate the batteries that came with the projector and insert them as shown. Then replace the battery cover.
  • Page 2 If you can’t connect the cable to your PowerBook , you may need to use an adapter. See your ® PowerLite 745c User’s Guide for instructions. Press the Source Search button on the projector until your computer image is displayed. , you’ve placed the projector off...
  • Page 3 When fully inserted, the end of the card will protrude. NOTE: Use only the Epson 802.11g card. Other brands may not be compatible and are not guaranteed to work. , or it may be labeled CRT/LCD.
  • Page 4: Where To Get Help

    For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com. Epson is a registered trademark and EasyMP is a trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners.