D-Link DVG-1402S Quick Installation Manual
Broadband phone service voip router
Hide thumbs
Also See for DVG-1402S:
- Manual (59 pages) ,
- User manual (57 pages) ,
- Quick installation manual (14 pages)
Table of Contents
Advertisement
Quick Links
This product can be set up using Internet
Explorer or Netscape Navigator, 6.x or
above, with Javascript enabled
Before You Begin
You must have at least the following:
• A subscription with the bundled service provider included in this package
• A Computer with a CD-ROM drive and an Ethernet port running a Windows, Mac, or Linux
based OS (for initial setup)
• Ethernet based broadband modem
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DVG-1402S.09232004
DVG-1402S Broadband Phone Service VoIP Router
Phone Cord (Black)
CAT5 Ethernet Cable (Blue)
CD-ROM
12V DC Power Adapter
DVG-1402S
Broadband Phone
Service VoIP Router
Using a power supply
with a different voltage
rating will damage this
product and void the warranty.
Advertisement
Table of Contents
Related Manuals for D-Link DVG-1402S
Summary of Contents for D-Link DVG-1402S
-
Page 1: Before You Begin
These are the items included with your purchase: If any of the below items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DVG-1402S.09232004... -
Page 2: Hardware Overview
Hardware Overview Front Panel Power LED Indicates the unit is powered on. The Status LED will flash when performing a self-test/booting up or Status/Alarm is registering with the service provider. The Status LED will flash green slowly when the system is connected with the service. The Alarm LED will light solid red if the self-test or bootup fails. -
Page 3: Rear Panel
Hardware Overview (continued) Rear Panel Phone Ports Connect to your phones using standard phone cabling. Connect to your Ethernet enabled computers using Ethernet LAN Port cabling. WAN Port Connects to your broadband modem using an Ethernet cable. Reset This is used to reset the unit to the factory default settings. Power The power adapter attaches here. -
Page 4: Connecting The Dvg-1402S Directly To A Modem And Computer
If your computer connects directly to a DSL or Cable modem and does not connect to a router, follow the steps below to install your DVG-1402S. For any other configuration, please refer to the user manual located on the CD-ROM. After the steps are completed, your setup should look similar to the diagram below. - Page 5 Attach one end of the provided phone cable (black) to a standard analog telephone. h. Attach the other end of the phone cable to the phone port labeled 1 on the rear panel of the DVG-1402S. i. Reconnect the power to the Cable/DSL Modem (Plug in or turn on the power switch).
-
Page 6: Pppoe Configuration
PPPoE Configuration Some Internet Service providers use PPPoE as their method of connecting clients. If you have a PPPoE connection, you must follow the steps below to complete the configuration of your hardware. If you are unsure of your connection type or do not know your username and password, please check with your Internet Service Provider. - Page 7 Check to see if the status LED light goes from blinking green to solid green on the front panel of the DVG-1402S. The information found on the Device Information page is necessary for VoIP service...
- Page 8 D-Link Technical Support. You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.