Table of Contents
Advertisement
Quick Links
O
WNER'S
Projection Television
42HDX82
50HDX82
57HDX82
65HDX82
© 2002 TOSHIBA CORPORATION
All Rights Reserved
M
ANUAL
®
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
23565682A
Advertisement
Table of Contents
Related Manuals for Toshiba 42HDX82
Summary of Contents for Toshiba 42HDX82
-
Page 1: Important Safety Information
Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number: Serial number: 23565682A... -
Page 2: Child Safety
Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Before operating the TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions... -
Page 3: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. - Page 4 Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 26) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen.
-
Page 5: Table Of Contents
Important safety information ... 2–5 Introduction ... 7 Welcome to Toshiba ... 7 Exploring your new TV ... 7 Note regarding Quick Connect Guide ... 7 Connecting your TV ... 8 Note regarding picture quality ... 8 Connecting a VCR ... 8 Connecting a cable converter box ... -
Page 6: Introduction
Congratulations! You have purchased one of the finest projection TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. This manual applies to models 42HDX82, 50HDX82, 57HDX82, and 65HDX82. -
Page 7: Connecting Your Tv
(see page 14). NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: For GOOD picture quality: Use a standard stereo A/V yellow video cable. For BETTER picture quality: If your equipment has an S-video connector, use an S-video cable instead of a standard yellow video cable. -
Page 8: Connecting A Cable Converter Box
Connecting a cable converter box This connection allows you to watch basic and premium cable channels. To use the TV’s features, select ANT-1. To view premium channels, select ANT-2, tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. -
Page 9: Connecting A Dvd Player Or Satellite Receiver And A Vcr
Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables •... -
Page 10: Connecting A Dvd Player With Colorstream (Component Video) And A Vcr
TV programs. You can record one channel while watching another channel. ® Your TV has ColorStream (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba ® DVD player with ColorStream ) can greatly enhance picture quality and realism. -
Page 11: Connecting A Dtv Receiver/Set-Top Box With Colorstream ® (Component Video) And A Vcr
Connecting a DTV receiver/set-top box with ® ColorStream (component video) and a VCR This connection allows you to watch DTV (digital TV broadcast), VCR, and TV programs, and record DTV and TV programs. You can record from one source while watching a program from another source. -
Page 12: Connecting Two Vcrs
Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record one channel while watching another channel. You will need: • two coaxial cables • two sets of standard A/V cables VCR1 VIDEO From Antenna... -
Page 13: Connecting A Device To The Dvi/Hdcp Input
Connecting a device to the DVI/HDCP The DVI/HDCP input on your TV is designed to accept HDCP program material in digital form from EIA/CEA-861–compliant consumer electronic devices, such as a set-top box or DVD player equipped with a DVI-D digital single-link output connection. The DVI/HDCP input is designed for best performance with 1080i high-definition video signals. -
Page 14: Connecting A Device To The Ir Blaster
TV.) ___________ *The IR blaster OUT function has been verified for use with Toshiba infrared-controlled devices. The IR blaster IN function has been verified for use with SmarTouch™ STS/STS-C wireless RF control systems. Due to the wide variation in remote control operation among manufacturers, these functions may or may not operate with other brands. -
Page 15: Connecting An Audio System
Connecting an audio system This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 56). -
Page 16: Using The Remote Control
Using the remote control Preparing the remote control for use Your Toshiba TV remote control has one dedicated TV mode and five universal modes: VCR, Cable/SAT, DVD, Audio1, and Audio2. The target devices and default devices being programmed for each mode... -
Page 17: Remote Control Functional Key Chart
Remote Control functional key chart Toshiba TV Cable Key Label (TV) (CBL/SAT) (CBL/SAT) LIGHT Lights the remote key, and toggles between enabled and disabled Illumination mode. SLEEP Sleep timer --- POWER Power Power 1/MOVIE Digit 1 Digit 1 2/SPORTS Digit 2... - Page 18 Toshiba TV Cable Key Label (TV) (CBL/SAT) (CBL/SAT) TV/VCR AM/FM DISC --- STOP REC** PIP CH PIP channel up/down PIP on/off MULTI Strobe STILL PIP Still SWAP PIP Swap LOCATE PIP Locate SOURCE PIP Source Notes: • “---” will send nothing.
-
Page 19: Programming The Remote Control For Use With Your Audio/Video Devices
Programming the remote control for use with your audio/video devices Device code setup 1. Refer to the Device code table on pages 22–23 to find the code for the brand of your device. If more than one code is listed, try each one separately until you find the one that works. -
Page 20: Using The Volume Lock Feature (8000)
Using the volume lock feature (8000) For the TV, CABLE/SAT, VCR, and DVD modes, the volume controls (VOL yz and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIO1/2 modes. For example, to lock the volume controls to always jump to the CABLE/SAT mode: 1. -
Page 21: Device Code Table
STARGATE TASHIRO 0106 TELECAPTION TATUNG 0139, 0110, 0111 TELEVIEW TEAC 0139, 0110, 0127, TEXSCAN 0111 TOCOM TECHNICS 0121, 0122, 0123, TOSHIBA 0124 UNIKA TEKNICA 0124, 0127, 0112 UNIVERSAL THOMSON 0179, 0183 VIDEOWAY TOSHIBA 0101, 0146, 0166, VIEWSTAR 0160 ZENITH VECTOR RESEARCH 0111... - Page 22 SANYO MARANTZ 4124 SHARP MCINTOSH 4116 SONY MITSUBISHI 4148 NAKAMICHI 4106, 4117 TEAC ONKYO 4109, 4114 TOSHIBA YAMAHA OPTIMUS 4103, 4127, 4131, 4130 PANASONIC 4119, 4118, 4121 PHILIPS 4123 PIONEER 4105, 4107, 4150 DVD setup codes Brand Code 4119, 4118, 4121...
-
Page 23: Learning About The Remote Control
Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the “Remote Control functional key chart” on pages 18–19. turns the TV on and off POWER allows access to the sleep timer (automatic TV shut-off) function SLEEP... -
Page 24: Setting Up Your Tv
Setting up your TV Learning about the menu system After you have installed the batteries and programmed the remote control, you will need to set some preferences on the TV using the menu system. You can access the menu system using the buttons on the TV or remote control. -
Page 25: Using The Quick Connect Guide
Using the Quick Connect Guide The Quick Connect Guide automatically starts the first time the TV is turned on. This feature provides on-screen instructions to guide you through initial setup of your TV. You can change the current settings any time. 1. -
Page 26: Changing The On-Screen Display Language
Changing the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen display of adjustment menus and messages. To select a language: 1. Press MENU, and then press x or • until the SET UP menu appears. -
Page 27: Adding Channels To The Tv's Memory
Adding channels to the TV’s memory When you press Channel y or z, your TV will stop only on the channels stored in the TV’s channel memory. Follow the steps below and on the next page to program all active channels into the TV’s memory. -
Page 28: Adding And Erasing Channels Manually
Adding and erasing channels manually After you have programmed the channels automatically, you can manually add or erase specific channels. To add or erase channels: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons. -
Page 29: Adjusting The Color Convergence
Adjusting the color convergence This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. - Page 30 3. Press x or • to display the Center Convergence menu. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 B L U E TO ADJUST ENTER TO SELECT COLOR...
-
Page 31: Using The Tv's Features
Using the TV’s features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. To switch between two channels: 1. Select the first channel or video mode you want to view. 2. -
Page 32: Labeling Channels
3. Press x or • to display the FAVORITE CH1 menu, for example. CH INPUT will be highlighted. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 CUSTOM T I MER 0 0 0... - Page 33 4. Press the Channel Number buttons to select a channel you want to label. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 CUSTOM T I MER 0 0 0...
-
Page 34: Viewing The Wide-Screen Picture Formats
Viewing the wide-screen picture formats You can view programs in a variety of picture sizes—Natural, Theater Wide 1, Theater Wide 2, Theater Wide 3, and Full. The way the image displays in any of the picture sizes will vary depending on the format of the program you are viewing. Select the picture size that displays the current program the way that looks best to you. - Page 35 (Continued from previous page) Theater Wide 1 picture size • The picture is non-uniformly enlarged—the center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. • A small part of the picture at the top and bottom is hidden;...
-
Page 36: Scrolling The Theater Wide Picture (Theater Wide 2 And 3 Only)
Scrolling the Theater Wide picture (Theater Wide 2 and 3 picture sizes only) 1. Press PIC SIZE to select either Theater Wide 2 or 3 mode. 2. Press MENU, and then press x or • until the THEATER menu appears. 3. -
Page 37: Using The Pop Double-Window Feature
Using the POP double-window feature The POP (picture-out-picture) feature splits the screen into a double window that allows you to watch two programs at the same time. The POP program can come from a TV broadcast or an external source, such as a VCR. -
Page 38: Switching The Main And Pop Pictures
Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures. Freezing the POP picture Press STILL while you are using the POP feature. The POP picture will become a still picture. To return to the moving picture, press STILL again. -
Page 39: Using The Locks Menu
Using the LOCKS menu The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and New PIN Code functions. You can use these functions after entering the correct PIN code. Entering the PIN code 1. Press MENU, and then press x or • until the LOCKS menu appears. -
Page 40: Using The V-Chip Menu
Using the V-CHIP menu Some TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language). The V-CHIP control feature in this TV detects the signals and blocks the programs according to your selections. To use this feature, perform the following setup. -
Page 41: Mpaa Rating (Independent Rating System For Movies)
MPAA RATING (Independent rating system for movies) 1. From the LOCKS menu, select MPAA RATING. 2. Press x or • to display the MPAA RATING menu, and then press z or y to highlight MPAA RATING. 3. Press x or • to display the MPAA RATING menu. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 LOCKS MPAA RAT I NG... -
Page 42: Unlocking Programs Temporarily
Unlocking programs temporarily 1. If you try to watch a TV program that exceeds the rating limits you set, the TV enters program lock mode. After 4 seconds, the TV starts the favorite channel search function (see page 39). You can either unlock the program temporarily (see steps 2–4) or select a non-locked program to watch. -
Page 43: Locking Video Inputs
To unlock a channel: 1. From the LOCKS menu, select CH LOCK. 2. Press x or • to display the CH LOCK menu. 3. Press yzx • to highlight the channel you want to unlock, then press ENTER. 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 LOCKS V CH I P ENABLE... -
Page 44: Using The Front Panel Lock Feature
Using the front panel lock feature Lock the front panel buttons to prevent the buttons from being pressed accidentally (by children, for example). When the front panel lock is in ON mode, all control buttons on the TV front panel (except POWER) do not operate. -
Page 45: Adjusting The Picture
Adjusting the picture Selecting the picture mode You can select from four picture modes: Sports, Standard, Movie, and Preference. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture setting (factory setting) Movie Movie-like picture setting (factory setting) Preference Your personal preferences* *(see “Saving new preference”... -
Page 46: Saving Your New Preferences
Saving your new preferences You can save your PICTURE quality adjustments (contrast, brightness, color, tint, and sharpness) in the PICTURE menu PREFERENCE MODE. To save your new preferences: 1. Press MENU, and then press x or • until the PICTURE menu appears. -
Page 47: Using Cableclear™ Dnr (Digital Noise Reduction)
Using CableClear™ DNR (digital noise reduction) This feature allows you to reduce visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal or playing back a video cassette or disc damaged by repeated use. ™... -
Page 48: Selecting The Color Temperature
Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures: cool, medium, and warm. Mode Picture Quality cool blueish medium neutral warm reddish To select the color temperature: 1. Press MENU, and then press x or • until the PICTURE menu appears. -
Page 49: Selecting The Video Input Source
Selecting the video input source Press INPUT on the remote control or TV/VIDEO on the TV to view a signal coming from another device connected to your TV, such as a VCR or video disc player (see illustrations below). You can select ANT 1, VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, DVI, or ANT 2 depending on which input jacks are used for connecting the devices (see “Connecting your TV”... -
Page 50: Using The Closed Caption Feature
Using the closed caption feature The closed caption feature has two options: • Captions—An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as “CC” in TV listings). • Text—An on-screen display of information not related to the current program, such as weather or stock data (when provided by individual stations). -
Page 51: Setting The Sleep Timer
Setting the sleep timer To set the sleep timer to turn the TV off automatically: 1. Press SLEEP to set the length of time until the TV turns off. 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 T I MER 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Every time you press SLEEP, the time will increase by 10... -
Page 52: Adjusting The Sound
Adjusting the sound Muting the sound Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE) the sound. While the sound is off, the screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Every time you press the button, the mute mode will change in the following order. -
Page 53: Using The Wow Surround Sound Feature
Using the WOW™ surround sound feature The WOW™ surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. WOW consists of three features—SRS 3D, FOCUS and TruBass—that use stereo signals from a TV broadcast or video input. -
Page 54: Resetting Your Audio Adjustments
Resetting your audio adjustments The RESET function returns your audio adjustments to the following factory settings: Bass ... center (50) Treble ... center (50) Balance ... center (0) To reset your audio adjustments: 1. Press MENU, and then press x or • until the AUDIO menu appears. -
Page 55: Turning Off The Built-In Speakers
Turning off the built-in speakers Use this feature to turn the TV speakers off when you connect an audio system (see “Connecting an audio system” on page 16). To turn off the built-in speakers: 1. Press MENU, and then press x or • until AUDIO menu appears. -
Page 56: Using The Stablesound Feature
® Using the StableSound feature When the signal source is changed, the StableSound the highest volume level to prevent extreme changes in volume (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial). To turn on the StableSound ®... -
Page 57: Viewing The Demonstration Mode
Viewing the demonstration mode The demonstration mode is an option available in the MENU button on the TV front panel that will demonstrate several of your TV’s features. To start the demo: Press and hold MENU on the TV for 4 seconds. To stop the demo: Press RECALL, EXIT, or POWER. -
Page 58: Appendix
IR Blaster OUTPUT: 3 V(p-p), 10 kohm INPUT: 3 V(p-p) to 5 V(p-p), pulse code modulated (Toshiba TV code) over 38 KHz carrier Dimensions 42HDX82: Width 39-3/8 inches (1000.1 mm) Height 46-1/2 inches (1181.1 mm) Depth 18-2/3 inches (474.7 mm) 50HDX82: Width 46-1/8 inches (1171.6 mm) -
Page 59: Troubleshooting
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem TV will not turn on No picture, no sound No sound, picture OK Poor picture, sound OK Poor reception of broadcast channels Cannot receive above channel 13 Black box appears on the screen Unable to select a certain channel... -
Page 60: Limited United States Warranty
WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. ® FST PURE is a registered trademark of Toshiba America Consumer Products, Inc. REV. MAR02... -
Page 61: Limited Canada Warranty
ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. FST PURE ® is a registered trademark of Toshiba America Consumer Products, Inc. REV. MAR02... -
Page 62: Index
Index A/V receiver connection ... 16 ANT 1/2 ... 27 Antenna cables ... 8 Audio cables ... 8 AUDIO OUT sound, selecting ... 56 Audio system connection ... 16 Auto convergence ...30 Automatic light sensor (ALS) ... 47 Auto power off ...58 BACKGROUND selection ... - Page 63 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C. V6W 1J5, CANADA TEL: (604) 303-2500 MANUFACTURED BY ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products. CableClear, SurfLock, and TouchFocus are trademarks of Toshiba America Consumer Products, Inc. PRINTED IN USA (02-10) R...