Setup; Assembling The Forks - Toro TX 1000 Operator's Manual
Adjustable forks compact tool carriers
Hide thumbs
Also See for TX 1000:
- Operator's manual (60 pages) ,
- Installation instructions manual (8 pages) ,
- Installation instructions (4 pages)
Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
1
Assembling the Forks
Parts needed for this procedure:
1
Adjustable-forks frame
2
Fork
1
Upper fork frame
7
Bolt (3/8 x 1 inch)
7
Locknut (3/8 inch)
Procedure
1.
Install the forks over the adjustable-forks frame
as shown in
Figure
a bolt (3/8 x 1 inch) and locknut (3/8 inch).
Description
Adjustable-forks frame
Fork
Upper fork frame
Bolt (3/8 x 1 inch)
Locknut (3/8 inch)
3, and secure each fork with
Qty.
1
2
1
Assemble the forks.
7
7
1. Fork
2. Fork frame
3. Upper fork frame
2.
Install the upper fork frame over the assembly
as shown in
Figure
frame using 5 bolts (3/8 x 1 inch) and 5 locknuts
(3/8 inch).
3.
Tighten all fasteners securely.
5
Use
Figure 3
4. Bolt (3/8 x 1 inch)
5. Locknut
3, and secure the upper
g001353
Advertisement
Table of Contents
