Advertisement
Quick Links
PowerLite
E20/X49/W49/118/119W/982W/992F/1288
®
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: These illustrations show the PowerLite 992F, but the instructions are the
same for other models unless otherwise noted.
Contents
Make sure your projector box includes all of these parts (LAN module cover not
included with PowerLite E20/992F/1288):
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Computer
Computer1
HDMI 1
HDMI 2
L
R
Video
Audio 1
Computer 2
Mic
Audio 2
RS-232C
MonitorOut
Audio Out
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector's computer ports and
the other end to your laptop or computer's
switch your laptop to external display (see "Troubleshooting" on the back of
this sheet). You can also connect an audio cable.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows Vista
or later: After turning on the projector, follow the on-screen
®
instructions to install the Epson
USB Display software (EMP_UDSE.EXE; only
®
on first connection). If the software screen does not display automatically, open
My Computer, Computer, or This PC, then double-click EPSON_PJ_UD.
OS X 10.7.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them.
Computer1
HDMI 1
HDMI 2
Video
L
R
Audio 1
Computer 2
Mic
Audio 2
RS-232C
MonitorOut
Audio Out
USB cable
HDMI cable
VGA cable
Audio cable
monitor port. Make sure to
HDMI cable
RCA audio cable
RCA video cable
(composite video)
Wired network (PowerLite X49/W49/118/119W/
982W/992F)
Connect the projector to your network using an Ethernet cable. See "Setting up
a wired connection" for more information.
Computer1
HDMI 1
HDMI 2
Video
L
R
Audio 1
Computer 2
Mic
Audio 2
RS-232C
MonitorOut
Audio Out
USB device or document camera (PowerLite X49/
W49/118/119W/982W/992F/1288)
Connect a supported digital camera, USB flash drive, USB storage device, or
Epson USB document camera to the projector's USB-A (flat) port.
Computer1
HDMI 1
HDMI 2
L
R
Video
Audio 1
Computer 2
Mic
Audio 2
RS-232C
MonitorOut
Audio Out
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. See the online User's Guide for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the
USB cable
power light on the projector turns blue.
power button twice.
Advertisement
Related Manuals for Epson PowerLite E20
Summary of Contents for Epson PowerLite E20
- Page 1 The USB Display appears in the Finder. Double-click USB Display Installer and projector beeps, the Status light flashes blue, and then stays on. follow the on-screen instructions to install the Epson USB Display software (only on first connection). Video device Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them.
- Page 2 Follow these steps to set up the projector for a wireless network connection. PowerLite E20: To reduce or enlarge the image, press the E-Zoom Note: This feature is not available for the PowerLite E20. For more information buttons on the remote control.
- Page 3 If you’re not sure what the IP address of the projector is, turn the projector on and select Net. Info. - Wired LAN or Net. Info. - Wireless Note: This feature is not available for the PowerLite E20/1288. For more LAN from the Network menu to display the IP address of the projector.
- Page 4 If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries if necessary. EPSON and PowerLite are registered trademarks, EPSON Exceed Your Vision is a registered logomark, and Epson Registration iProjection is a trademark of Seiko Epson Corporation.