Advertisement
RV 5200 Bumperfit Color Rearview Camera
Installation and operating instructions
■
Safety precautions
ATTENTION:
A
Installation may only be carried out by trained specialists! Observe all quality
standards of the automobile industry!
A
Consult with your authorized car dealer if installation requires the drilling of holes or
other modifications of the vehicle.
A
Fire hazard! When drilling pay attention to the location of cable harnesses, tank and
fuel pipes! Never drill into car parts which are load-bearing or are important for safety
reasons!
A
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
A
Route and secure all wiring so it cannot touch any moving parts, such as the gear shift,
handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater
outlet.
■
Scope of delivery
1
Camera with 1.5 m connection cable
1
6 m Extension cable (also available as an accessory)
1
Mounting bracket (incl. screws and washers)
4
Self-tapping screws
1
Short instructions (English language)
© 2006 Siemens VDO Trading GmbH
All rights reserved.
These operating instructions are subject to copyright.
Subject to technical and visual changes and typing errors.
1
Advertisement
Summary of Contents for Siemens RV 5200
-
Page 1: Safety Precautions
RV 5200 Bumperfit Color Rearview Camera Installation and operating instructions ■ Safety precautions ATTENTION: Installation may only be carried out by trained specialists! Observe all quality standards of the automobile industry! Consult with your authorized car dealer if installation requires the drilling of holes or other modifications of the vehicle. - Page 2 ■ Mounting examples Front ring Tilt adjustment ring (optional) O-ring (small) O-ring (large) Tilt adjustment ring (optional) Clamping ring CCD camera Connector Screw 3 mm Spring washer Toothed washer Bracket base Bracket 4 self-tapping screws for bracket base fixation 1. Bumperfit mounting 26 mm Ø...
-
Page 3: Pin Assignment
Pin assignment Application examples 1) Direct connection to Monitor Navigation System with adapter cable 2) Connection to Multimedia System via MI 2200 PIN No. Description + 12 V DC power supply CVBS Video output Not connected Not connected Ground... -
Page 4: Specifications
Weight: ............. . 110 g MI RV 5200...