Owner's Instruction
Dehumidification Mode
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Dehumidification Mode.
3
Set the fan speed. You can select the fan speed in four steps - low,
medium, high, or chaos. Each time the button is pressed, the fan
°C/°F(5 s)
speed mode is shifted.
TIME(3 s)
During Dehumidification Mode
• If you select the dehumidification mode on the operation selection button, the indoor unit starts to run the
dehumidification function, automatically setting the room temp. and air volume to the best condition for
dehumidification based on the sensed room temp.
In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control the
room temp. either.
• During the healthy dehumidification function, the air volume is automatically set according to the algorithm
responding to the current room temp. and makes the room condition healthy and comfortable even in the
high humidity season.
14 Wireless Remote Controller
Heating Mode
This Function is only for H/P model.
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Heating Mode.
3
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to check the room
°C/°F(5 s)
temperature.
When setting the desired temperature is lower than room
temperature, heating wind isn't blow out.
To raise the temperature
TIME(3 s)
To lower the temperature
4
Set the fan speed again. You can select the fan speed in four steps–
low, medium, high, or chaos. Each time the button is pressed, the fan
speed mode is shifted.
Owner's Instruction
❈ Setting Temp. Range in
Heating Mode : 16~30°C
(60°F~86°F)
Owner's & Installation Manual 15