Owner's Instruction
Auto Changeover Mode
This Function is only available on some products.
1
Press the ON/OFF button. The unit will respond with beep sound.
2
Press MODE button to select Auto Changeover Mode.
3
Set the desired room temperature.
❈ Setting Temp. Range in Auto Changeover Mode : 18~30°C
°C/°F(5 s)
(64~86°F)
To raise the temperature
TIME(3 s)
To lower the temperature
4
You can select the fan speed in four stepss-low, medium, high and
chaos. Each time the button is pressed, the fan speed mode is
shifted.
During Auto changeover Mode
The air conditioner changes the operation mode automatically to keep indoor temperature. When room
temperature vary over ±2°C(4°F) with respect to setting temperature, air conditioner keeps the room
temperature within ±2°C(4°F) with respect to setting temperature by auto changeover mode.
12 Wireless Remote Controller
Auto Changeover Mode - Setting the Mode Change Temperature
This Function is to set the operating mode of the Auto Changeover Mode.
1
In Auto Changeover Mode, Press FUNCTION button to select
Setting the Mode Change Temperature.
2
Press the TEMPERATURE SETTING button to set desired Mode Change Temperature.
(Default value is 2°C(4°F).)
To raise the temperature
To lower the temperature
The Mode Change Temperature is the difference of temperature when from cooling mode to heating mode or
from heating mode to cooling mode.
Ex) When setting temperature is 25°C(76°F) and room temperature is 20°C(68°F), then operating mode is
heating. If you set the mode change temperature to 2°C(4°F), when the room temperature up to
27°C(25°C + 2°C)(80°F(76°F + 4°F)), the unit start cooling operation.
Owner's Instruction
❈ Mode Change Temp. Range
: 1~7°C(2~14°F)
Owner's & Installation Manual 13