Table of Contents
Advertisement
Quick Links
Actuator Commissioning Tool
Product Description
The 985-047 Actuator Commissioning Tool provides
a portable instrument for exercising, calibrating, and
testing resistive, proportional (voltage/current),
floating, and on/off actuators. LED display shows
feedback voltages or output. LEDs indicate
operating mode selection and auxiliary switch
contact closure. The Commissioning Tool combines
accurate and reliable technology in a user-friendly,
yet economical package.
The Commissioning Tool saves on installation time
and is compatible with all Siemens actuators and
most competitors' models. A plug-in transformer or
24 Vac power supply input enables the
Commissioning Tool to output resistance,
AC voltage, DC voltage, and current for controlling
an actuator. It requires no controller hook-up, which
makes equipment calibration, setup, and adjustment
a quick and easy process.
Figure 1. Actuator Commissioning Tool.
Item Number 129-287, Rev. 100
Features and Benefits
•
Universal Compatibility
Works with all Siemens actuators, most
competitors' actuators, and other voltage,
current, or resistance controlled equipment
•
Compact Portable Unit
Allows easy handling in the field
•
Pushbutton Selectable Output/Feedback
Modes
Gives user a complete testing device. No
separate instruments are required for field
testing
•
Digital and LED feedback Displays
Provides user with clearly readable voltage
and auxiliary switch feedback in dimly lit
conditions
•
Plug-in Terminal Block Test Lead
Connections
Accommodates easy interchangeability of
multiple sets of test leads
Contents
•
Actuator Commissioning Tool
•
Plug-in transformer
•
Terminal blocks, set of three (extra)
•
Carrying case
Required Tools
•
Test leads
•
1/8 in. tip flat-blade screwdriver
Product Number
985-047
Operating Instructions
Document No. 129-287
Rev. 1, October, 1999
Page 1 of 8
Advertisement
Table of Contents
Related Manuals for Siemens 985-047
Summary of Contents for Siemens 985-047
-
Page 1: Product Description
Gives user a complete testing device. No separate instruments are required for field The Commissioning Tool saves on installation time testing and is compatible with all Siemens actuators and • most competitors’ models. A plug-in transformer or Digital and LED feedback Displays... -
Page 2: Installation Conventions
The resistive mode is the default operating mode when the commissioning tool is not Figure 3. Commissioning Tool Dimensions (in./mm). powered. To select other operating modes, the ON/OFF switch must be turned ON. LEDs indicate which mode is active. Page 2 of 8 Siemens Industry, Inc. -
Page 3: Operation
When power is initially supplied to the Commissioning Tool, it defaults to Equipment Damage Hazard. the resistive mode. This device is only 24 Vac nominal. Applying higher voltages could damage the device. Page 3 of 8 Siemens Industry, Inc. - Page 4 A green LED should 6. Turn the dial (Figure 7) to adjust the level of light and indicate that the voltage mode is active resistance. (Figure 9). Page 4 of 8 Siemens Industry, Inc.
- Page 5 5. Depress the SELECT MODE pushbutton to for a procedure to apply power to the activate the current mode. A green LED should Commissioning Tool. light and indicate that the current mode is active (Figure 11). Page 5 of 8 Siemens Industry, Inc.
- Page 6 Tool during the proportional voltage and current DC voltage between Terminal 7 modes. (DC FEEDBACK) and Terminal 8 (COM). NOTE: During the floating control or resistive modes, the digital display is not used and reads zero. Page 6 of 8 Siemens Industry, Inc.
- Page 7 Field repairs must not be made. Commissioning Tool. NOTE: The digital display shows the level of the DC voltage applied between Terminal 7 (DC FEEDBACK) and Terminal 8 (COM). Page 7 of 8 Siemens Industry, Inc.
-
Page 8: Specifications
Total Shipping Weight 5.4 lb (2.5 kg) The performance specifications are nominal and conform to acceptable industry standards. Siemens Building Technologies, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced.