Maintenance; Cleaning Your Tv; Screen, Frame, Cabinet And Stand; Power Cord - LG LM86 Series Owner's Manual
Hide thumbs
Also See for LM86 Series:
- Owner's manual (521 pages) ,
- Owner's manual (56 pages) ,
- Owner's manual (54 pages)
Table of Contents
Advertisement
Available languages
Available languages
26
MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y Make sure to turn the power off and disconnect the power cord and all other cables first.
y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
y Avoid touching the screen at all times, as this may result in damage to the screen.
y Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
y Do not use any chemicals as this may damage the product.
y Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Cannot control the TV
y Check the remote control sensor on the product and try again.
with the remote control.
y Check if there is any obstacle between the product and the remote control.
y Check if the batteries are still working and properly installed (
No image display and
y Check if the product is turned on.
no sound is produced.
y Check if the power cord is connected to a wall outlet.
y Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
y Check the power control settings. The power supply may be interrupted.
suddenly.
y Check if the Auto sleep feature is activated in the Time settings.
y If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting to the
y Turn the TV off/on using the remote control.
PC (RGB/HDMI DVI),
y Reconnect the RGB/HDMI cable.
'No signal' or 'Invalid
y Restart the PC with the TV on.
Format' is displayed.
Solution
to
,
to
).
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
