Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
!
WARNING
It can result in serious injury or death when the directions are ignored
CAUTION
!
It can result in minor injury or product damage when the directions are ignored
!
WARNING
• Installation or repairs made by unqualified persons can result in hazards to you and others.
• Installation MUST conform with local building codes or, in the absence of local codes, with
the National Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical
Code Part1 CSA C.22.1.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment mal-
function, property damage, personal injury and/or death.
When installing
• Product installation must be performed at the service center or by an expert.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• When re-installing the already installed product it must be performed at the service center or by an
expert.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• Use standard parts.
- Failure to do so can cause fire, electric shock, malfunction or injury.
• Do not store or use combustible gas or flammable substances near the product.
- Doing so can cause fire and electric shock.
• Do not disassemble, repair or modify the product at your own discretion.
- Doing so can cause malfunction.
• Do not install in a place that is susceptible to rain.
- Doing so can cause malfunction.
• Do not install in a place that is susceptible to humidity.
- Doing so can cause malfunction.
• Do not store the product near heating devices.
- Doing so can cause fire.
• Install it in a secure place that can withstand the weight of ACS IO.
- In case it is installed in a place unable to cannot withstand ACS IO it may fall and get damaged.
• Do not use the product in the following particular environments.
- Product performance may be hindered and the product may be damaged if used in a place where
gas, steam, or sulfuric acid is present.
• Do not touch the switch with wet fingers.
- Doing so may result in electric shock and cause the product to malfunction.
• Any electrical work must be done by an expert from where the product was purchased or at the
service center.
IMPORTANT SAFETY INSTRUCTIONS
3
- Quick Links:
- Acs Io Installation Methods
Hide quick links:
Advertisement
Table of Contents
