Product Contents Verify that your DGE-560T adapter package contains the following items. If any items are missing, please contact your reseller. • D-Link DGE-560T Gigabit PCI Express Ethernet Adapter • Drivers, Manual, and Warranty on CD System Requirements Before installing the DGE-560T, check your system for the following minimum system requirements.
Page 3
Ethernet Adapter, the value leader among Fast Ethernet/Gigabit Ethernet adapters. With the D-Link DGE-560T, your PC can be connected to an Ethernet, Fast Ethernet, or Gigabit Ethernet network. The PC must be equipped with a PCI Express x1 expansion slot; alternatively the D-Link DGE-560T can be installed in a PCI Express x4, x8 or x16 expansion slot.
1000Mbps Gigabit Ethernet Network and the indicator lights green when the port is connected to a 100Mbps Fast Ethernet Network. Otherwise, this indicator remains off when the port is connected to a 10Mbps Ethernet Network. D-Link DGE-560T Quick Installation Guide...
Driver Installation Note: Do not install the adapter until you install the drivers. With your computer on, insert the D-Link CD into your CD-ROM Drive. When the autorun screen appears, click Install Drivers. If the Autorun CD function does not automatically start on your computer, go to Start >...
4. Insert the network adapter into the PCI Express slot and push it down vertically into the slot until it is firmly seated. 5. Install the bracket screw to secure the network adapter to the computer chassis. D-Link DGE-560T Quick Installation Guide...
Refer to page 16 in the manual for instructions to verify your installation. Additional Information If you are encountering problems setting up your network adapter, please refer to the manual located on the Autorun CD. D-Link DGE-560T Quick Installation Guide...