Mini Hi-Fi
System
Model : CM9950
ENGLISH | SIMPLE MANUAL (1 of 2)
To view the instructions of advanced features,
visit
http://www.lg.com
and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
FM Antenna
Printed in China
Disc & Data Playback
a
,
: USB A (USB 1) /
: USB B (USB 2)
Select CD, USB 1 or USB 2.
b
CD
USB 2
USB 1
Press C / V to select a desired song and press d/M to play.
c
,
During USB 1 / 2 playback, you can adjust the tempo by rotating A / B TEMPO.
Folder Searching
Press PRESET.FOLDER W/S to select a folder and press d/M to play the first file of
the selected folder.
,
Empty folders are not searched.
CM9950-FS_DUSALLK_MFL68823916_Sim_1.indd 1
Speaker Connection
,
Make sure to connect the speaker plugs into their corresponding colored speaker connectors.
Connection for SPEAKER LIGHTING
www.lg.com
Radio Operation
a
b
FM 87.5
Select FM.
Tune the desired frequency. (Press and hold for auto tuning. Press for Manual tuning.)
c
,
Select STEREO or MONO on FM Function.
Using External Device ( or )
a
AUX IN Connection
AUDIO OUT
PORT. IN Connection
<
Select AUX 1, AUX 2 or PORTABLE.
b
z
c
Play the music on the connected external device.
Presetting Radio Station
a
FM 87.5
Select the station to preset.
b
01
Select the preset number and store the station.
Select preset station to listen to.
c
To delete all the saved station
Press and hold TUNER MEMORY.
a
Press TUNER MEMORY when 'ERASE ALL?' blinks to confirm.
b
ERASE ALL ?
X-BOOM PLUS
You can connect two units to play music together.
a
Press and hold H/P MODE (X-BOOM PLUS).
b
H/P
MODE
X-BOOM PLUS
Rotate H/P VOL./SYNC SET to adjust Delay setting.
c
H/P VOL. / SYNC SET
Press H/P MODE (X-BOOM PLUS) to save the Delay setting.
d
H/P
MODE
X-BOOM PLUS
,
This function is available on CD, USB 1, USB 2, BLUETOOTH, PORTABLE Function.
Deleting File
a
Select the file you want to delete in stop mode.
Select the folder you want to delete.
Select to delete the file, folder or format the USB.
b
DEL FILE?
DEL FOLDER?
FORMAT?
DELETE
,
Cancel the selection.
c
Perform the selection.
,
This function is supported only in stop status. (USB only).
2015-03-11
3:28:48