Table of Contents
Advertisement
SETTING OSD LANGUAGE
•
Use the control buttons (LEFT/RIGHT or UP/DOWN or MENU) to access the "LANGUAGE SELECTION" menu.
•
Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language.
•
To exit from this OSD menu, press EXIT button.
NOTE:
Setting the OSD language is only necessary upon initial setup. The OSD language will stay the same until changed
by the user.
Luminance/Contrast Controls
LUMINANCE
Adjusts the overall image and background screen luminance.
NOTE: For low luminance settings, the display will automatically compensate by adjusting the screen contrast.
This will result in a reduced contrast ratio.
For high luminance settings, the display will automatically compensate by turning down uniformity
compensation. This may result in decreased uniformity.
If digital compensation occurs, the luminance value on the OSD will change to magenta.
NOTE: The optimal display performance will be in the range where the OSD luminance value is black. When the
display cannot achieve the desired luminance, the numerical luminance value on the OSD will blink.
BLACK
Adjusts the black luminance.
When low settings are selected that cannot be displayed, the indicator on the OSD will turn magenta.
CONTRAST (Analog input only)
Adjusts the overall image and background screen brightness by input signal level.
NOTE: It is recommended to use LUMINANCE to adjust screen brightness for lower power consumption and
improved image quality.
AUTO CONTRAST (Analog input only)
Adjusts the image displayed for non-standard video inputs.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE (V.SIZE) (Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting.
If the "AUTO ADJUST" function do not give you a satisfactory picture setting, a further tuning can be performed using
the "H.SIZE (or V.SIZE)" function (dot clock). For this a Moiré test pattern could be used. This function may alter the
width of the picture. Use LEFT/RIGHT Menu to center the image on the screen. If the H.SIZE (or V.SIZE) is wrongly
calibrated, the result would look like the left drawing. The image should be homogeneous.
When H.SIZE value is
When H.SIZE value is
wrong.
English-13
When H.SIZE value is
improved.
correct.
Advertisement
Table of Contents
