Related Manuals for Toro 51544
Summary of Contents for Toro 51544
- Page 1 FORM NO. 3319–901 Power Sweept Blower Model No. 51544—89000001 & Up Operator’s Manual...
-
Page 2: Important Safety Instructions
EN 1033. Symbol Glossary Safety alert triangle — Thrown or flying symbol within triangle objects — Whole body indicates a hazard exposure Safety alert symbol Keep dry EThe Toro Company – 1998 Printed in USA All Rights Reserved... - Page 3 Read operator’s Electrical manual shock/electrocution Consult technical manual for proper Disconnect power service procedures Do not open or remove safety shields Severing of fingers or while engine is hand—impeller blade running Wear eye protection Assembly Note: Blower is shipped with inlet cover installed. Note: Refer to Figures section at the back of the manual.
-
Page 4: Before Starting
If a loss of performance is detected while operating blower, unplug unit, remove inlet cover, and check impeller blades for wear. If blades are severely worn, see your Authorized TORO Service Dealer for a new impeller. Servicing Double-insulated... -
Page 5: Troubleshooting
Troubleshooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Unit won’t run or stops running 1. Unit not plugged in 1. Plug in unit 2. On/off switch in “off” position 2. Turn to “on” 3. Inlet cover or vacuum tube incorrectly 3. Secure cover or vacuum tube installed or removed 4. -
Page 6: Warranty Conditions
TORO AUSTRALIA POWER EQUIPMENT WARRANTY Subject to the warranty condition below, this tool care (in the opinion of the Company), and such (hereinafter called “the product”) is warranted by Toro warranty does not cover damage, malfunction or Australia (hereinafter called “the Company”) to be... - Page 7 Figures m-4027 1601 1. Pointers aligned in lock postion 1. Model and 2. Air inlet serial number decal 1990 1. Switch 1571 1. Blower tube 3. Tab 2. Blower 4. Latch housing outlet m-4003 1. Cord lock 1596 1. Inlet cover 3.