Page 2
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Your new NEC Technologies MultiSync contain the following: • MultiSync LCD ™ monitor, LA-1422JMW, with tilt/swivel base 400V • Power Cord • Video Signal Cable • User’s Manual • Registration Card MultiSync LCD 400V monitor with Video Signal Cable Power Cord User’s Manual...
Macintosh cable adapter (Figure B.1). Tighten all screws. 400V NOTE: To obtain the MultiSync LCD call NEC Technologies at (800) 820-1230. 3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on the back of the monitor (Figure C1).
Controls (On-Screen-Manager) Controls ™ The OSM controls on the front of the monitor function as follows: Control Main Menu EXIT Exits the OSM controls. Moves the highlighted CONTROL area up/down to select one of the controls. CONTROL –/+ Has no function. PROCEED Proceeds to the selected menu choice (indicated...
Page 7
Controls AccuColor ™ Control System Color presets select the desired color setting. If a setting is adjusted, the name of the setting will change to Custom. Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars.
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
• Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects). • Get regular eye checkups. For more detailed information on setting up a healthy work environment, call NEC at (800) 820-1230, NEC FastFacts document #900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations –...
640 x 480* at 60Hz to 85Hz 800 x 600* at 56Hz to 85Hz 832 x 624* at 75Hz 1024 x 768 at 60Hz to 75Hz ... NEC cites recommended resolution at 286 mm/11.3 inches 214 mm/8.4 inches AC 100 – 120 V/220 – 240 V @ 50/60 Hz 0.7A @ 100 –...
Capability: Allows you to use the entire screen area in most resolu- FullScan ™ tions, significantly expanding image size. OSM Display Screen Copyright 1997 by NEC Technologies, Inc. 78133331 solution with the Windows ® 95 operating system ®...
”ghost” of that image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC Technologies recommends using a screen saver at regular intervals whenever the screen is idle.
References • BBS NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support • Electronic Channels: Internet e-mail: tech-support@nectech.com...
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit, other than the LCD backlight, which proves defective for a period of three (3) years from the date of first consumer purchase.
FCC Rules. MultiSync is a registered trademark of NEC Technologies, Inc. in the U.S. and of NEC Home Electronics, Ltd. in Canada, UK, Germany, France, Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia. AccuColor and ErgoDesign are registered trademarks of NEC Technologies, Inc.