NEC MultiSync LCD2180UX User Manual page 12

Nec display solutions user's manual multimedia monitor multisync lcd2180ux

Hide thumbs Also See for MultiSync LCD2180UX:

User manual (122 pages)

Technical specifications (2 pages)

Dimensional drawing (1 page)

Table Of Contents

Table of Contents

Available languages

Controls

OSM TURN OFF: The OSM control menu will stay on as long as it is use. In the

OSM Turn Off submenu, you can select how long the monitor waits after the

last touch of a button to shut off the OSM control menu. The preset choices are 10-

120 seconds by 5 second increments.

OSM LOCK OUT: This control completely locks out access to all OSM control

functions. When attempting to activate OSM controls while in the Lock Out

mode, a screen will appear indicating the OSM controls are locked out.

There are two types of OSM LOCK OUT: OSM LOCK OUT with BRIGHT-

NESS and CONTRAST control: To activate the OSM Lock Out function, press

SELECT, then "+" key and hold down simultaneously. To deactivate the OSM

Lock Out, press SELECT, then "+" key and hold down simultaneously.

BRIGHTNESS and CONTRAST can be adjusted while in the lock out mode.

OSM LOCK OUT with no control: To activate the OSM Lock Out function,

press SELECT, then ">" key and hold down simultaneously. To deactivate the

OSM Lock Out, press SELECT, then ">" key and hold down simultaneously.

No controls can be adjusted while in the lock out mode.

OSM ROTATION: To rotate OSM between Landscape and Portrait modes.

RESOLUTION NOTIFIER: This optimal resolution is 1600 x 1200. If ON is

selected, a message will appear on the screen after 30 seconds, notifying you

that the resolution is not at 1600 x 1200.

HOT KEY: You can adjust the brightness and contrast directly. When this

function is set to ON, you can adjust the brightness with "<" or ">", contrast

with + or – key, while the OSM menu is off.

FACTORY PRESET: Selecting Factory Preset allows you to reset most OSM

control settings back to the factory settings. Individual settings can be reset by

highlighting the control to be reset and pressing the RESET button.

Information

DISPLAY MODE: Provides information about the current resolution display and

technical data including the preset timing being used and the horizontal and

vertical frequencies. Increases or decreases the current resolution.

MONITOR INFO.: Indicates the model and serial numbers of your monitor.

OSM Warning: OSM Warning menus disappear with Exit button.

NO SIGNAL: This function gives a warning when there is no Horizontal or

Vertical Sync. After power is turned on or when there is a change of input

signal, the No Signal window will appear.

RESOLUTION NOTIFIER: This function gives a warning of use with optimized

resolution. After power is turned on or when there is a change of input

signal or the video signal doesn't have proper resolution, the Resolution

Notifier window will open. This function can be disabled in the TOOL menu.

OUT OF RANGE: This function gives a recommendation of the optimized

resolution and refresh rate. After the power is turned on or there is a

change of input signal or the video signal doesn't have proper timing, the

Out Of Range menu will appear.

NOTE: If "

For advanced user menu see "Appendix".

LCD2180UXManual1020.p65

–continued

CHANGE DVI SELECTION" is displayed, switch to DVI SELECTION.

10/21/03, 9:10 AM

Table of Contents

Show Quick Links

Quick Links:
Specifications

Hide quick links:

Table of Contents

This manual is also suitable for:

L213e9

NEC MultiSync LCD2180UX User Manual page 12

Available languages

Hide quick links:

Related Manuals for NEC MultiSync LCD2180UX

Related Products for NEC MultiSync LCD2180UX

This manual is also suitable for:

Table of Contents