NEC MultiSync LCD2180UX User Manual page 54

Nec display solutions user's manual multimedia monitor multisync lcd2180ux

Hide thumbs Also See for MultiSync LCD2180UX:

User manual (122 pages)

Technical specifications (2 pages)

Dimensional drawing (1 page)

Table Of Contents

Table of Contents

Available languages

Appendix

OSM Lock Out

OSM Rotation

Resolution Notifier

Factory Preset

Tag8

Video Band Width

(Analog input only)

Sync Threshold

(Analog input only)

SOG Correction

(Analog input only)

Edge Lock

Tag9

Display Mode

Monitor Info.

Demo Multi

LCD2180UXManual1020.p65

–continued

This control completely locks out access to all OSM control functions. When attempting to

activate OSM controls while in the Lock Out mode, a screen will appear indicating the

OSM controls are locked out. There are two types of OSM LOCK OUT: OSM LOCK OUT

with BRIGHTNESS and CONTRAST control: To activate the OSM Lock Out function, press

SELECT, then "+" key and hold down simultaneously. To deactivate the OSM Lock Out,

press SELECT, then "+" key and hold down simultaneously. BRIGHTNESS and CONTRAST

can be adjusted while in the lock out mode. OSM LOCK OUT with no control: To activate

the OSM Lock Out function, press SELECT, then ">" key and hold down simultaneously.

To deactivate the OSM Lock Out, press SELECT, then ">" key and hold down

simultaneously. No controls can be adjusted while in the lock out mode.

To switch OSM between Landscape and Portrait modes. Press "+" or "-" to select.

The optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the

screen after 30 seconds, notifying you that the resolution is not set to 1600 x 1200.

Press "+" or "-" to select.

Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,

CONTRAST, IMAGE CONTROLS, COLOR CONTROL SYSTEM, SHARPNESS, EXPANSION

MODE, OFF TIMER, OSM LEFT/RIGHT, OSM DOWN/UP, OSM TURN OFF, DISPLAY MODE)

back to the factory settings. Highlighting the control to be reset and pressing the RESET button

can reset individual settings.

Press "SELECT" to reset.

It is used when the unnecessary noise from computer appears on a screen. It is strong

ineffective, so that a number becomes small. Press "+" or "-" to select.

Adjusts the slice level of a synchronization signal. Press "SELECT" to move the

adjustment menu.

SEP./COMP.: Adjusts the sensitivity of the separate or composite input signals.

Try this option if the FINE adjustment does not successfully eliminate the noise.

Sync On Green: Adjusts the sensitivity of the Sync On Green input signals.

Adjusts the slice level when separating a synchronization from Sync On Green signal

input. Press "+" or "-" to select.

Shapes the waveform of the Sync On Green signals. Try this option if the FINE adjustment

does not eliminate the noise produced after the signal cable has been extended. Press

"SELECT" to move adjustment menu.

OFF

The inputted synchronization signal is used as it is.

AUTO

Shapes the waveform according to the input waveform automatically. The signal which has

not deteriorated is used as it is.

Corrects the waveform irrespective of the input waveform.

Operating your monitor at a non-standard timing may cause images to appear darker than

normal or have colour distortion. Use of the Edge Lock control will adjust images to their

normal state.

Provides information about the current display resolution and technical data, including

the preset timing currently being used and the horizontal and vertical frequencies. Increases

or decreases the current resolution. Press "SELECT" to move the adjustment mode, and

press "+" or "-" to adjust.

Indicates the model and serial numbers of your monitor.

Demo Multi demonstrates multiple screens. Press "SELECT" to move adjustment menu.

This feature provides a single large screen using 4, 9, 16 and 25 monitors. This requires

you to feed the PC output into each of the monitors through a splitter. Specify the number

of monitors and determine the monitor numbers by referring to the figures in menu.

Minimum screen size is 320 x 240. The number of monitors that you can use depends on

the input resolution. I.e. if the resolution is VGA 640 x 480 and the screen size is selected

by 320 x 240; the number of monitors will be 4 (2 hor./2 vert.). When using the resolution

UXGA 1600 x 1200 and the screen size is (again) 320 x 240, the number of monitors will

be 25 (5 hor./5 vert.).

10/21/03, 9:11 AM

Table of Contents

Show Quick Links

Quick Links:
Specifications

Hide quick links:

Table of Contents

This manual is also suitable for:

L213e9

NEC MultiSync LCD2180UX User Manual page 54

Available languages

Hide quick links:

Related Manuals for NEC MultiSync LCD2180UX

Related Products for NEC MultiSync LCD2180UX

This manual is also suitable for:

Table of Contents